Hi,
I would like to implement cell triangulation with the nRF91 in order determine the location of the device via cellular. I already had a look at the available posts such as https://devzone.nordicsemi.com/f/nordic-q-a/44093/nrf9160-dk-geolocation-through-lte
However, the problems were not solved and it seems there was not much development around this topic.
According to the documentation the %NBRGRSRP command should return the neighbor cells which could be a good start for my purpose. Unfortunately, this command returns only "OK" and no information about cells.
I tested this command with the at_client and the latest modem firmware, while being connected to NB-IoT.
- How can this command be used, respectively is there another possibility for retrieving the neighbouring cells?
- Is there already any approach avaible for cell triangulation?
Thanks in advance,
Manuel