Product Catalog
Index
Index
3
4. 6. 9. 33. 53. 71. 87.
Introduction MAFI Product Portfolio Supports and Brackets Radio Brackets Antenna Brackets Wall Mount Solutions Rooftop Solutions – Fixed – Free standing
123. 136. 140. 141.
© 2021 MAFI AB. All rights reserved.
Accessories Tables and Guides MAFI Global Network Table of Content
4
Introduction
Your direction is our goal. In a world where everyone has to depend on each other, MAFI wants to make your life easier. For 29 years our customer relations has been just as important as the quality of our products. Knowing this, we have built the worldwide company we are today. On paper, MAFI is an engineering company that designs, tests, manufactures and delivers steelwork solutions. But we go further than that: We are responsive – we see it as part of our mission to understand your actual need. We are resourceful — we are always looking for new ways to enhance our solutions. We are reliable — we always deliver on our promises. Whatever it takes to get you there, we’re always prepared to go the extra mile; making us your preferred strategical partner.
CE Marking, Product Development and Design Tools MAFI is a EN 1090 certified organization, which means that our CE-marked kits comply with EN 1090-1, EN 1090-2 standards to Execution Class 2. During the product development process, every component is designed and optimized using Finite Element Analysis techniques. Prototypes are then physically tested and refined in our laboratory. Every design follows these guidelines: •
Make the kit as easy as possible to assemble and provide clear assembly instructions.
•
The kit is packed in a small box as possible to ensure efficient storage and transport.
•
Make the product as light as possible for easy handling on site.
Every kit comes with a data sheet with load tables. The load tables give the maximum ultimate vertical
and horizontal loads that may be applied to the kit. For bracket kits that can be clamped to tubular parent members — or support a tubular member — there is also a table of torque resistance for different standard tube diameters. MAFI provides CAD blocks for all kits and we can also provide Excel tools for checking brackets and freestanders. Disclaimer: Design recommendations given by MAFI concerning the use of a particular product are based on site information provided by the customer. MAFI provides a Declaration of Performance for the product itself, and it is the customer’s responsibility to ensure that imposed loads are within the capacity of the product. It is always the responsibility of the site designer to verify that the parent structure is adequate to support the loads imposed by the product and that the installation of the product will comply with the installation instructions and with statutory and site owner’s rules and regulations.
Introduction
5
Time for a game-changer!
For most of us, the past years has been marked by challenges and sometimes tragic losses, privately and in business. Despite the pandemic, many businesses worldwide are accelerating, such as the rollout of 5G networks. Thanks to close collaborations with customers in all markets, we started early to develop and deliver the new products that our partners need - and we at MAFI GROUP are ready for the challenges! In general, equipment for 5G is heavier than for older networks, and the requirements for, above all, security and performance are much higher. MAFI GROUP's long experience and design knowledge create the security that our partners expect - and through efficient logistics and well-proven solutions, we ensure that [total cost of ownership] is reduced.
ESICS is an extremely efficient tool that simplifies complex calculations. Based on a wide range of parameters such as equipment, wind load, and much more, it quickly calculates which brackets and other components are required to design or upgrade a secure site. ESICS is a game-changer, and it is already available in the UK, Denmark, Norway, Sweden, and the US is next in line. As the demand is enormous, we work intensively to add all our markets. There is a lot to tell about ESICS, and you are welcome to www.esics.se for more information.
The demands for reduced environmental impact, especially regarding CO2 emissions, permeate all aspects of our global society. Therefore, we can proudly state that our solutions help our customers minimize their carbon dioxide emissions and help them achieve the goals of the Paris Agreement. In addition to our products being optimized for minimal raw material consumption and weight, they are packed efficiently to have as low a volume as possible. Within MAFI GROUP, we also do what we can to contribute - one of many concrete measures is that our car fleet will gradually become fully electric by 2023. Our global presence also contributes to a reduced climate impact. We have offices and production in the Americas, Asia, Europe, and Africa-Middle East, which means that we are close to our customers with reduced shipping distances and closer cooperation. MAFI's global team works continuously with exchanges of experience between markets to find the best possible solutions for an effective rollout.
Pierre Bengtsson CEO MAFI Group
Finally, I would like to present a new tool that I am convinced will revolutionize the lives of all those who work with site design, ESICS. It stands for Enhanced Site Innovation and Calculation System, or what has already begun to be called "the bracket checker."
We want to be close to our customers, to quickly respond to local needs
6
MAFI Telecom Product Portfolio
MAFI product portfolio is divided into two main product segments; MAFI Support Solutions – MSS and MAFI Integrated Solutions – MIS.
MAFI Product Portfolio
MAFI Product Portfolio
7
MAFI MSS In the MSS segment you will find all kinds of general steel structure products needed to build a reliable and sustainable telecom site, for example freestanding platforms, support brackets, tubes and accessories. A product that can fit or host equipment from any telecom equipment manufacturer is an MSS product and constitutes a standard range. MSS products are stocked in our own and our distributors warehouses ready for fast deliveries every day.
MAFI MIS An MIS product is developed as an integrated part of a customer solution or product. That means that every MAFI MIS product is tailor-made for our customers. MAFI is constantly developing new MIS products for existing as well as new customers.
8
Products © 2019–2020 © 2021 MAFI AB. All rights reserved.
9
Supports and Brackets
MAFI 3263 One-Direction Offset Family
MAFI 3268 Symmetric Offset Family
MAFI 3610 Raking Tower Leg Offset Family
MAFI 3611 Vertical Tower Leg Offset Family
Page 10
Page 12
Page 14
Page 16
MAFI 3622, 3623 High Torque Tower Leg Offset Family
MAFI 3274 Small Universal Pole Mount
MAFI 4418 3-Sector Antenna Mount
MAFI 5310 Joint Plate Kit
Page 22
Page 24
Page 18
MAFI 5320 Crossover Kit
MAFI 43249 Combiclamp Family
Page 28
Page 30
© 2021 MAFI AB. All rights reserved.
Page 26
10
*Article 3263/3265/3272/3273 3263/3265/3272/3273 *Article
Rev 6
MAFI 3263* One-Direction Offset Family
3263
Designed to allow an equipment pole to be offset from a parent pole or tower leg.
Flexibility 3273 is the smallest one and offers a maximum offset of 240 mm (9.4 in). 3263 and 3265 are the medium sized ones and with two different U-bolt kits for a larger range of offset members. Maximum offset for the 3263 is 420 mm (16.5 in) and for 3265 with the largest offset member mounted is 397 mm (15.6 in). 3272 has a maxmimum offset of 797 mm (31.4 in) and incorporates a double clamp to cope with the high torque loads imposed by antennas at that large offset. The hole pattern for 3272 is also suitable for option U-bolt kit 2867-1. This enables offset members to range up to 114.3 mm (4.5 in).
3273
3272
Additional Data For more detailed product data see sections Bracket Properties, and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
Content of kit 3263
Content of kit 3265
Content of kit 3272
Content of kit 3273
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3263 or E-order number (SEG): 6000667 3265 or E-order number (SEG): 6000668 3272 or E-order number (SEG): 6000665 3273 or E-order number (SEG): 6000666 Contact information can be found at www.mafigroup.com.
© 2021 MAFI MAFI AB. AB. All All rights rights reserved. © 2019–2020
*Article 3263/3265/3272/3273 *Article 3263/3265/3272/3273
11
Rev 6
Parent member
Measurements in mm (in)
40 × 40 mm–120 × 120 mm 1.6 × 1.6 in–4.7 × 4.7 in
3263/-65
3263/-65/-73: Ø 25–169 mm Ø 1–6.7 in
3272
3272: Ø 48–193 mm Ø 1.9–15.5 in 40 × 40 mm–120 × 120 mm 1.6 × 1.6 in–4.7 × 4.7 in
3273 Offset member 3263/-72/-73: Ø 60–76 mm Ø 2.4–3 in 3265, optional for 3272: Ø 89–114 mm Ø 3.5–4.5 in
Ft MR
Performance
Fm
Ultimate transient man-load (Ft): 2.4 kN Maximum side force (FS) 3263/-65: 1660 N
FS
Maximum side force (FS) 3272: 1750 N Maximum side force (FS) 3273: 2900 N Load capacity (Fm) 3263/-65/-73: 120 kg (265 lb) Load capacity (Fm) 3272: 60 kg (132 lb) Rot. slip resistance (MR): See Rotational Slip Table
Parts list Part
Material
Quantity 3263/-65/-73
Quantity 3272
Clamp
S355MC HDG
2
4
Bracket
S355MC HDG
2
2
U-bolt M12
8.8 HDG
2
2
Threaded rod M12
8.8 HDG
4
8
Fasteners
8.8 HDG
Incl.
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3263
640 (25.2)
115 (4.5)
65 (2.6)
7.3 (16.1)
3263
3265
3272
3273
Product options 2867-1: U-bolt kit for circular members Ø 88.9–114.3 mm ( 3.5–4.5 in). Optional for 3272. © 2019–2020 MAFI Allreserved. rights reserved. 2021 MAFI AB. All AB. rights
EN 1090
12
Rev 7
*Article 3268/3270 3268/3270
MAFI 3268* Symmetric Offset Family
3268
Designed to provide support for two similar antennas offseted symmetrically from a central parent pole. A third antenna may be mounted on the parent pole.
Flexibility 3268 is the smaller one with a maximum offset of 422 mm (16.6 in) between parent and offset pole. The bigger 3270 has a maximum offset of 850 mm (33.5 in). Maximum offset between the two offset members are 844 mm (33.2 in) and 1700 mm (66.9 in) respectively. The hole pattern for 3268 is also suitable for option U-bolt kit 2867-1. This enables offset members to range up to 114.3 mm (4.5 in).
3270
Additional Data For more detailed product data see sections Bracket Properties and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3268 or E-order number (SEG): 6000669 3270 or E-order number (SEG): 6000670
Content of kit 3268
Content of kit 3270
Contact information can be found at www.mafigroup.com. © 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
*Article 3268/3270 3268/3270
Rev Rev7 7
13
Measurements in mm (in)
3268
Parent member Ø 76–169 mm Ø 3–6.7 in
3270
Offset member Ø 60–76 mm Ø 2.4–3 in Optional for 3268: Ø 88.9–114.3 mm Ø 3.5–4.5 in
Ft
Performance Ultimate transient man-load (Ft): 2.4 kN Maximum side force (FS): 2000 N Load capacity (Fm) 3268: 90 kg (198 lb) Load capacity (Fm) 3270: 60 kg (132 lb) Rot. slip resistance (MR): See Rotational Slip Table
Fm
Fm
MR
FS
FS
Parts list Part
Material
Quantity
Clamp
S355MC HDG
2
Bracket
S355MC HDG
2
U-bolt M12
8.8 HDG
4
Threaded rod M12
8.8 HDG
4
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3268
1050 (41.3)
170 (6.7)
65 (2.6)
12.2 (26.7)
3268
Product options 2867-1: U-bolt kit for circular members Ø 88.9–114.3 mm ( 3.5–4.5 in). Optional for 3268. © MAFI AB. All AB. rights © 2021 2019–2020 MAFI Allreserved. rights reserved.
3270
EN 1090
Rev 5 Rev 5
14
*Article *Article 3610/3613 3610/3613
MAFI 3610* Raking Tower Leg Offset Family
Angle options for 3610
Designed for mounting an equipment pole on a raking parent member in a perpendicular or oblique direction. The kits consist of a pair of brackets with all necessary fasteners.
Flexibility The raking tower leg offset can carry equipment up to 250 kg (551 lb), offset member included. This can be useful when radio and antenna equipment is to be preassembled off site and then lifted and mounted to a tower. The hole pattern on the 3610 front clamp is designed to allow oblique installation on angular tower legs. The bracket arm can be fixed at angles 45° or 60°, to the left or right, of the parent member. Offset poles for either kit can range from Ø 60.3–76.1 mm (2.4–3 in). When using the option 2867-1 the range increases up to 114.3 mm (4.5 in).
Additional Data For more detailed product data see sections Bracket Properties and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
Content of kit 3610
Content of kit 3613
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3610 or E-order number (SEG): 6000676 3613 or E-order number (SEG): 6000677 Contact information can be found at www.mafigroup.com.
© 2019–2020 reserved. © 2021 MAFI AB. All rights reserved.
Rev 5 Rev 5
*Article 3610/3613 *Article 3610/3613
15
Measurements in mm (in)
3610 Parent member 3610: 60 × 60–120 × 120 mm 2.4 × 2.4–4.7 × 4.7 in 3613: 120 × 120–200 × 200 mm 4.7 × 4.7–7.9 × 7.9 in 3610: Ø 76.1–139.7 mm Ø 3–5.5 in
3613
3613: Ø 139.7–244.5 mm Ø 5.5–9.6 in 3610: 60 × 60–120 × 120 mm 2.4 × 2.4–4.7 × 4.7 in 3613: 120 × 120–200 × 200 mm 4.7 × 4.7–7.9 × 7.9 in
Ft
Offset member
MR
Ø 60.3–76.1 mm Ø 2.4–3 in Optional: Ø 88.9–114.3 mm Ø 3.5–4.5 in
Fm FS
Performance Ultimate transient man-load (Ft): 2.4 kN Maximum side force/offset arm (FS): 4000 N Load capacity (Fm): 250 kg (551 lb) Rot. slip resistance (MR): See Rotational Slip Table
Parts list Part
Material
Quantity
Clamp
S355MC HDG
4
Bracket
S355MC HDG
2
U-bolt M12
8.8 HDG
2
Threaded rod M12
8.8 HDG
4
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3610
440 (17.3)
280 (11)
80 (3.1)
12.1 (26.7)
3610
Product options 2867-1: U-bolt kit for circular members Ø 88.9–114.3 mm ( 3.5–4.5 in). © 2021 2019–2020 MAFI AB. Allreserved. rights reserved. © MAFI AB. All rights
3613
EN 1090
16
Rev Rev 55
*Article3611/3612/3614/3615 3611/3612/3614/3615 *Article
MAFI 3611* Vertical Tower Leg Offset Family
Angle options for 3611 and 3612
Designed for mounting an equipment pole on a vertical parent member in a perpendicular or oblique direction. The kits consists of a pair of brackets with all necessary fasteners.
Flexibility The vertical tower leg offset can carry equipment up to 250 kg (551 lb), offset member included. This can be useful when radio and antenna equipment is to be preassembled off site to and then lifted and mounted to a tower. The hole pattern on the 3611/-12 front clamp is designed to allow oblique installation on angular tower legs. The bracket arms can be fixed at angles 45° or 60°, to the left or right, of the parent member. Offset poles for either kit can range from Ø 60.3–76.1 mm (2.4–3 in). When using the option 2867-1 the range increases up to 114.3 mm (4.5 in).
Content of kit 3611
Content of kit 3612
Content of kit 3614
Content of kit 3615
Additional Data For more detailed product data see sections Bracket Properties and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3611 or E-order number (SEG): 6000678 3612 or E-order number (SEG): 6000679 3614 or E-order number (SEG): 6000680 3615 or E-order number (SEG): 6000681 Contact information can be found at www.mafigroup.com.
© 2021 MAFI © 2019–2020 MAFI AB. AB. All All rights rights reserved. reserved.
*Article 3611/3612/3614/3615 *Article 3611/3612/3614/3615
Rev 5 Rev 5
17
Measurements in mm (in)
3611 Parent member 3611/-12: 60 × 60–120 × 120 mm 2.4 × 2.4–4.7 × 4.7 in
3612
3614/-15: 120 × 120–200 × 200 mm 4.7 × 4.7–7.9 × 7.9 in 3611/-12: Ø 76.1–139.7 mm Ø 3–5.5 in
3614
3614/-15: Ø 139.7–244.5 mm Ø 5.5–9.6 in
3615
3611/-12: 60 × 60–120 × 120 mm 2.4 × 2.4–4.7 × 4.7 3614/-15: 120 × 120–200 × 200 mm 4.7 × 4.7–7.9 × 7.9 in
Ft
Offset member Ø 60–76 mm Ø 2.4–3 in
MR
Optional: Ø 88.9–114.3 mm Ø 3.5–4.5 in
Fm
Performance FS
Ultimate transient man-load (Ft): 2.4 kN Maximum side force/offset arm (FS): 4000 N Load capacity (Fm): 250 kg (551 lb) Rot. slip resistance (MR): See Rotational Slip Table
Parts list Part
Material
Quantity
Clamp
S355MC HDG
4
Bracket
S355MC HDG
2
U-bolt M12
8.8 HDG
2
Threaded rod M12
8.8 HDG
4
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3611
500 (19.7)
280 (11)
80 (3.1)
12.9 (28.4)
3611
3612
3614
3615
Product options 2867-1: U-bolt kit for circular members Ø 88.9–114.3 mm ( 3.5–4.5 in). © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
EN 1090
Rev A
18
MAFI 3622 3623 High Torque Tower Leg Offset Family
Article 3622/3623 1 (3)
3622
3623
About the Product Designed for mounting an offset member to either a vertical or inclined circular member where a high torque resistance is required. Total carrying capacity is up to 250 kg (551 lb) per kit.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3622 3623 Contact information can be found at www.mafigroup.com.
3622
3623
© 2020 MAFI AB. All rights reserved © 2021 MAFI AB. All rights reserved.
Rev A
Article 3622/3623
2 19 (3)
Measurements in millimeters (inches) 3622
3623
Content of kit 3622
© 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
3623
Rev A
20
Parent member
3 (3) Article 3622/3623
Performance
3622:
Ft
Ultimate transient man-load (Ft): 2.4 kN
Ø 76.1 — 139.7 mm Ø 3 — 5.5 "
Maximum Horizontal Force (FH): 4000 N Load capacity (Fm): 250 kg (551 lb)
3623: (Only solid member) Ø 40 — 60.3 mm Ø 1.6— 2.4"
Offset member
Fm
Ø 60.3 — 76.1 mm Ø 2.4 — 3 " Optional: Ø 88.9 — 114.3 mm Ø 3.5 — 4.5 "
Rotational Slip Resistance (MR) per single bracket
Use ultimate loads to calculate the resulting torque
Circular Parent member Ø mm (")
Torque in Nm 3622
Torque in Nm 3623
40 (1.6)
—
426
42.3 (1.7)
—
456
48.3 (1.9)
—
534
60.3 (2.4)
—
690
76.1 (3)
596
—
88.9 (3.5)
706
—
101.6 (4)
816
—
114.3 (4.5)
924
—
139.7 (5.5)
1144
—
MR
Parts list Part
Material
Quantity 3622
Quantity 3623
Clamp
S355MC HDG
8
12
Bracket
S355MC HDG
2
2
U-bolt M12
8.8 HDG
2
2
Threaded Rod M12
8.8 HDG
8
12
Fasteners
8.8 HDG
Incl.
Incl.
Package data
FH
Offset
Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3622
530 (20.9)
317 (12.5)
78 (3.1)
19 (41.9)
3623
755 (29.7)
306 (12)
87 (3.4)
25.2 (55.6)
Product options
Product
Min Offset mm (")
Max Offset mm (")
3622
219 (8.6)
424 (16.7)
3623
195.5 (7.7)
424 (16.7)
2867-1: U-bolt kit for circular offset members Ø 88.9 — 114.3 mm ( 3.5 — 4.5 ")
© 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
21
© 2021 MAFI AB. All rights reserved.
22
Rev 4
Article Article 3274 3274
MAFI 3274 Small Universal Pole Mount
Designed for mounting an equipment pole on a parent pole or tower leg. The kit consists of a pair of brackets with all necessary fasteners.
Flexibility Can be mounted on a circular or angle member. Offset poles for equipment can range from Ø 48.3–114.3 mm (1.9–4.5 in).
Additional Data For more detailed product data see sections Bracket Properties and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
Content of kit
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3274 or E-order number (SEG): 6000688 Contact information can be found at www.mafigroup.com.
© 2021 MAFI MAFI AB. AB. All © 2019–2020 All rights rights reserved. reserved.
Rev 4
Article 3274 Article 3274
Rev 4
23
All measurements in mm (in).
Parent member 40 × 40–80 × 80 mm 1.6 × 1.6–3.1 × 3.1 in
Ø 25–114.3 mm Ø 1–4.5 in
Offset member Ø 48.3–114.3 mm Ø 1.9–4.5 in
Ft
Performance Ultimate transient man-load (Ft): 2.4 kN Maximum side force/bracket (FS): 4000 N
FS
Load capacity (Fm): 250 kg (551 lb) Rot. slip resistance (MR): See Rotational Slip Table
Fm
MR
FR
Parts list Part
Material
Quantity
Clamp
S355MC HDG
6
Threaded rod M10
8.8 HDG
4
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3274
410 (16.1)
110 (4.3)
50 (2)
5.8 (12.8)
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
3274
EN 1090
24
Rev7 7 Rev
*Article 4415/4418 *Article 4415/4418
MAFI 4418* 3-Sector Antenna Mount
Designed to accommodate three large antennas attached to a single circular parent member.
Flexibility This 3-sector antenna mount is both flexible and easy to assemble. 4415 is the smaller one with a maximum c/c offset of 186 mm (7.3 in) between parent and offset member center. Maximum c/c offset for 4418 is 286 mm (11.3 in).
Content of kit 4415
Additional Data For more detailed product data see sections Bracket Properties and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4415 or E-order number (SEG): 6000881 4418 or E-order number (SEG): 6000682 Contact information can be found at www.mafigroup.com.
Content of kit 4418
© 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
Rev 7
*Article 4415/4418 *Article 4415/4418
Rev 7
25
Measurements in mm (in)
4415 Parent member Ø 76–114.3 mm Ø 3–4.5 in
4418
Offset member Ø 60.3–76.1 mm Ø 2.4 –3 in
Performance
Ft
Ultimate transient man-load (Ft): 2.4 kN Maximum side force (FS): 4000 N Load capacity/offset arm (Fm): 60 kg (132 lb) Rot. slip resistance (MR): See Rotational Slip Table
Fm
MR
FS
Parts list Part
Material
Quantity
Clamp
S355MC HDG
4
Bracket
S355MC HDG
6
U-bolt M12
8.8 HDG
6
Spacer bushing
S355MC HDG
6
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4418
390 (15.4)
275 (10.8)
120 (4.7)
15.3 (33.7)
4415
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
4418
EN 1090
26
Rev44 Rev
*Article 5310/5311/5312 *Article 5310/5311/5312
MAFI 5310* Joint Plate Kit
5310
5312
Designed to provide perpendicular joints between solid or thick-walled circular and square members.
Flexibility Fits circular members ranging from Ø 25–60 mm (1–2.4 in) and square members ranging from 50 × 50–60 × 60 mm (2 × 2–2.4 × 2.4 in). See 5320/5321 for larger kits.
Additional Data For more detailed product data see sections Bracket Properties. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
Content of kit 5310
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 5310 or E-order number (SEG): 6000671 5311 or E-order number (SEG): 6000672 5312 or E-order number (SEG): 6000673
Content of kit 5311
Content of kit 5312
Contact information can be found at www.mafigroup.com. © 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
Rev 4
*Article 5310/5311/5312 *Article 5310/5311/5312
Rev 4
27
Measurements in mm (in)
5310/-11/-12
5310
Parent member 5310: Ø 25–35 mm Ø 1–1.4 in 5311: Ø 35–60 mm Ø 1.4– 2.4 in 5312:
5311
50 × 50–60 × 60 mm 2 × 2–2.4 × 2.4 in
5312
Offset member 50 × 50–60 × 60 mm 2 × 2–2.4 × 2.4 in
Performance Load capacity/joint (Fm): 100 kg (220 lb)
Fm
Parts list Part
Material
Quantity
Plate
S355MC HDG
2
U-bolt
8.8 HDG
4
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
5310
150 (5.9)
110 (4.3)
40 (1.6)
2.8 (6.2)
5310
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
5311
5312
EN 1090
28
Rev4 4 Rev
*Article 5320/5321 *Article 5320/5321
MAFI 5320* Crossover Kit
5320
Designed to provide perpendicular joints between circular and square members.
Flexibility 5320 fits circular members of Ø 76.1 mm (3 in) and square members ranging from 50 × 50–60 × 60 mm (2 × 2–2.4 × 2.4 in). 5321 fits circular members of Ø 114.3 mm (4.5 in) and square members ranging from 50 × 50–60 × 60 mm (2 × 2–2.4 × 2.4 in). See 5310/5311/5312 for smaller kits.
5321
Additional Data For more detailed product data see sections Bracket Properties, and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 5320 or E-order number (SEG): 6000674 5321 or E-order number (SEG): 6000675 Contact information can be found at www.mafigroup.com.
Content of kit 5320
Content of kit 5321
© 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
Rev 4
*Article 5320/5321 *Article 5320/5321
Rev 4
29
Measurements in mm (in)
5320
5321
Parent member 50 × 50–60 × 60 mm 2 × 2–2.4 × 2.4 in
Offset member 5320: Ø 76.1 mm Ø 3 in 5321: Ø 114.3 mm Ø 4.5 in
Performance Maximum side force (FS): 3875 N Load capacity/joint (Fm): 100 kg (220 lb) Rot. slip resistance (MR): See Rotational Slip Table
FR FS
MR
Fm
Parts list Part
Material
Quantity
Bracket
S355MC HDG
1
Plate
S355MC HDG
2
U-bolt
8.8 HDG/A4-80
2
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
5320
220 (8.7)
140 (5.5)
50 (2)
2.4 (5.3)
5320
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
5321
EN 1090
30
Rev5 5 Rev
*Article 43246/43247/43248/43249 *Article 43246/43247/43248/43249
MAFI 43249* Combiclamp Family 43246
43247
43248
43249
Designed to provide perpendicular joints between two circular members.
Flexibility 43246 connects one circular member of Ø 60.3 mm (2.4 in) to another circular member of Ø 48.3 mm (1.9 in). 43247 connects two circular members of Ø 76.1 mm (3 in). 43248 connects one circular member of Ø 114.3 mm (4.5 in) to another circular member of Ø 76.1 mm (3 in). 43249 connects two circular members of Ø 114.3 mm (4.5 in). The products are delivered with all necessary fasteners.
Additional Data For more detailed product data see sections Bracket Properties and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
Content of kit 43246
Content of kit 43247
Content of kit 43248
Content of kit 43249
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 43246 43247 43248 43249 Contact information can be found at www.mafigroup.com. © 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
*Article 43246/43247/43248/43249
Rev 5
*Article 43246/43247/43248/43249
Rev 5
31
Measurements in mm (in)
43246
43247 Parent/offset member 43246: Ø 60.3 mm Ø 2.4 in
43248
Ø 48.3 mm Ø 1.9 in 43247: Ø 76.1 mm Ø 3 in
43249
43248: Ø 114.3 mm Ø 4.5 in Ø 76.1 mm Ø 3 in 43249: Ø 114.3 mm Ø 4.5 in
Performance Maximum side force (FS): 2000 N Load capacity (Fm): 200 kg (441 lb)
Ma
Maximum axial moment (Ma) 43246: 150 Nm Maximum axial moment (Ma) 43247: 350 Nm
FS
Maximum axial moment (Ma) 43248: 350 Nm Maximum axial moment (Ma) 43249: 1000 Nm Rot. slip resistance (MR): See Rotational Slip Table
Fm
FR MR
Parts list Part
Material
Quantity
Bracket
S355MC HDG
1
U-bolt
8.8 HDG/A4-80
4
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
43249
280 (11)
280 (11)
100 (3.9)
7.8 (17.2)
43246
43247
43248
43249
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
EN 1090
32
© 2021 MAFI AB. All rights reserved.
33
Radio Brackets
MAFI 5110 Radio Support
MAFI 6030 Dual ERS Bracket
Page 34
Page 36
MAFI 1242 Universal Remote Radio Bracket Page 38
US Specific Products
MAFI 4019 RRU Mount Family
MAFI 4036 Single/Dual RRU Support
Page 40
Page 42
US Specific Products
MAFI 8411 Large Radio Mount Page 48
MAFI 6070,6072 RRH Mounting Bracket Page 50
© 2021 MAFI AB. All rights reserved.
MAFI 4060 Back-to-Back Radio Mount Page 44
34
Rev 5
Article Article 5110 5110
MAFI 5110 Radio Support
Mounted with option 5111
Designed for attaching radios or other equipment to existing or new cable trays.
Flexibility The support is delivered as a flat pack and can easily be mounted on cable trays of width 200–500 mm (7.9–19.7 in). Self-tapping screws and fasteners are included. Option 5111 allows mounting directly on surfaces such as roof tops or other solid platforms.
Content of kit 5110
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 5110 or E-order number (SEG): 6000687
Content of option kit 5111
Contact information can be found at www.mafigroup.com. © 2019–2020 © 2021 MAFI AB. All rights reserved.
Rev 5
Article 5110 Article 5110
Rev 5
35
Measurements in mm (in)
Parent structure Width of cable tray: 200–500 mm 7.9–19.7 in
Parts list Part
Material
Quantity
Support bracket
DX51D Z350
2
Self-tapping screw
8.8 Fe/ZnNi8P4
8
Fasteners
HDG/A4
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
5110
540 (21.3)
345 (13.6)
20 (0.8)
3.3 (7.3)
Product options 91103: Adaptor plate for Nokia RRH. 1234: Adaptor plate for Ericsson ERS. 5111: Angle profiles for platform attachment. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
5110
36
Rev 1 Rev 1
Article 6030 Article 6030
MAFI 6030 Dual ERS Bracket
Parent member 60 × 60–80 × 80 mm 2.4 × 2.4–3.1 × 3.1 in Ø 55–114.3 mm Ø 2.2–4.5 in 50 × 50–80 × 80 mm 2 × 2–3.1 × 3.1 in
Performance Load capacity/single bracket (Fm): 40 kg (88.2 lb) Load capacity/bracket pair: 80 kg (176.4 lb)
Bracket for attaching two standard or Heavy ERS units.
Fm
Flexibility
Fm
This bracket can be mounted on either circular, angular or box beam members, as well as on to a wall. The hole pattern for equipment is c/c 30 mm (1.2 in) or c/c 80 mm (3.1 in). The bracket also allows a mix of RRU and filter/PSU.
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-code.
How to Order
To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 6030
Measurements in mm (in)
Contact information can be found at www.mafigroup.com. Parts list Part
Material
Quantity
Bracket
S550 HDG
2
Fasteners
8.8 HDG/A4
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
6030
215 (8.5)
155 (6.1)
70 (2.8)
1.5 (3.3)
Content of kit
Product options 91139: Bolt kit. 4 pcs M8 x 20 mm (0.8 in) stainless steel A4 with captive washers.
6030 © 2019–2020 MAFI AB. AllAll rights reserved. © 2021 MAFI AB. rights reserved.
37
© 2021 MAFI AB. All rights reserved.
38
Rev Rev 1
Article 1242
MAFI 1242 Universal Remote Radio Bracket
Designed to carry a variety of radio brands attached to universal C-rail system.
Flexibility The Universal Remote Radio Bracket is developed to accomodate remote radio units by Ericsson, Huawei and Nokia. See equipment hole patterns on next page for c/c measurements, and also functional layout for attaching to C-rail system. For equipment with a horizontal c/c wider than 80 mm (3.15 in) an extra bracket is needed. The key hole pattern on the bracket makes it easy to mount, and all necessary bolts and channel nuts are included in the kit.
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 1242 Contact information can be found at www.mafigroup.com.
Content of kit © 2019–2020 © 2021 MAFI AB. All rights reserved.
Rev 1
Article 1242 Article 1242
Rev 1
39
Measurements in mm (in)
Parent member
Equipment hole patterns
Functional layout H1 ≈ 41 mm (1.61 in) H2 ≥ 20 mm (0.8 in) W ≥ 20 mm (0.8 in)
Performance Load capacity (Fm): 50 kg (110 lb) Maximum side force (FS): 540 N
FS
Fm
Parts list Part
Material
Quantity
Universal Remote Radio plate
S550 Z600
1
Flange bolt M8
A4-70
4
Channel nut M8
8.8 HDG
4
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
1242
570 (22.4)
125 (4.9)
25 (1)
1.6 (3.5)
Product options 91139: Bolt kit. 4 pcs M8 x 20 mm (0.8 in) stainless steel A4 with captive washers. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
1242
40
Rev 5
*Article 4019-2/4019-3/4019-4/4020 4019-2/4019-3/4019-4/4020 *Article
MAFI 4019* RRU Mount Family
4019-4
4019-3 Designed to provide a secure mounting solution for 1–4 Ericsson RRUs, with or without PSU. Single (4020), and double (4019-2) RRU mount can also be used in A2 configurations.
Flexibility The products can be mounted on circular, square or angular members. Single RRU mount 4020 can also be used for wall mounting. Fits any equipment with horizontal c/c 146 mm (5.75 in).
Additional Data
4019-2
Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4019-2 or E-order number (SEG): 6000684 4019-3 or E-order number (SEG): 6000685 4019-4 or E-order number (SEG): 6000686 4020 or E-order number (SEG): 6000683 Contact information can be found at www.mafigroup.com.
4020 © 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
*Article *Article 4019-2/4019-3/4019-4/4020 4019-2/4019-3/4019-4/4020
Rev55 Rev
41
Parent member 4019-3/-4: 40 × 40–80 × 80 mm 1.6 × 1.6–3.1 × 3.1 in 4020: 35 × 35–80 × 80 mm 1.4 × 1.4–3.1 × 3.1 in
Content of kit 4019-2
4019-2: Ø 40–114 mm Ø 1.6–4.5 in 4019-3/-4/4020: Ø 25–114 mm Ø 1–4.5 in
Content of kit 4019-3
4019-2/-3/-4: 40 x 40–80 x 80 mm 1.6 × 1.6–3.1 × 3.1 in 4020: 35 × 35–80 x 80 mm 1.4 × 1.4–3.1 × 3.1 in
Content of kit 4020
Content of kit 4019-4
Ft
Performance Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm) 4019-2: 2 x 35 kg (2 x 77 lb) Load capacity (Fm) 4019-3: 3 x 35 kg (2 x 77 lb) Load capacity (Fm) 4019-4: 4 x 35 kg (2 x 77 lb) Load capacity (Fm) 4020: 1 x 40 kg (1 x 88 lb)
Fm
Fm
Fm
Fm
Parts list Part
Material
Quantity 4019-2
Quantity 4019-3
Quantity 4019-4
Quantity 4020
Clamp
S355MC HDG
4
4
4
4
Bracket
S355MC HDG
2
2
2
1
Bushing
S355J2H HDG
4
8
8
-
Threaded Rod M10
8.8 HDG
4
4
4
4
Flange Bolt M10
A4
8
12
16
4
Fasteners
8.8 HDG
Incl.
Incl.
Incl.
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4019-2
360 (14.2)
230 (9.1)
90 (3.5)
5.8 (12.8)
4019-3
430 (16.9)
360 (14.2)
60 (2.4)
10.6 (23.4)
4019-4
810 (31.9)
260 (10.2)
60 (2.4)
11.5 (25.4)
2019–2020 AB. All rights reserved. ©© 2021 MAFI AB.MAFI All rights reserved.
4019-2
4019-3
4019-4
4020
EN 1090
42
Rev 2
*Article 4036/4037 4036/4037
MAFI 4036* Single/Dual RRU Support
4036
4036 together with 4037
Designed to provide a secure mounting solution for one Ericsson RRU, or two RRUs with the optional Dual RRU support expansion, with or without PSU or A2/A3.
Flexibility The support can be mounted on circular, square or angular members, with or without a PSU or A2/A3 attached to the backside of the RRU. The support is manufactured of high quality steel with hot dip galvanization treatment. Fits any equipment with horizontal c/c 146 mm (5.75 in).
4037
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4036 or E-order number (SEG): 6000826 4037 or E-order number (SEG): 6000827 Contact information can be found at www.mafigroup.com.
Content of kit 4036
Content of kit 4037
© 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
Rev 2
*Article 4036/4037 *Article 4036/4037
Rev 2
43
Measurements in mm (in)
Parent member 35 × 35–80 × 80 mm 1.4 × 1.4–3.1 × 3.1 in
Ø 35–114 mm Ø 1.4–4.5 in
35 × 35–80 × 80 mm 1.4 × 1.4–3.1 × 3.1 in
Performance Load capacity (Fm): 40 kg (88 lb)
Fm Parts list Part
Material
Quantity 4036
Quantity 4037
Clamp
S355MC HDG
4
-
Arm
S355MC HDG
2
2
Bushing
S355 HDG
6
6
Threaded rod M10
8.8 HDG
4
-
Bolt M10
8.8 HDG/A4
10
10
Fasteners
8.8 HDG
Incl.
Incl.
Package data
4036
Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4036
405 (15.9)
105 (4.1)
100 (3.9)
5.7 (12.6)
© 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
4037
44
US Specific Products
Rev A Rev A
Article 4060 1 (3)
MAFI 4060 Back-to-Back Radio Mount
About the Product This product is a portrait-style low profile back-to-back radio mount that fits equipment with M10 fixed horizontal C-C 146 mm (5.75") or M8 dynamic horizontal C-C up to 193 mm (7.6"). Since the upper and lower arms are independent, equipment of dissimilar sizes can be mounted together, without adding weight, EPA or complexity. The arms are also the clamps, for quick and easy installation.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4060 Contact information can be found at www.mafigroup.com.
4060 © 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Article 4060
Measurements in millimeters (inches)
Content of kit
© 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
RevRev A A
US Specific Products
2 45 (3)
46
RevRev A A
US Specific Products
Article 4060 3 (3)
Parent member 38.1 — 101.6 mm 1.5 — 4" Ø 42.3 — 76.1 mm Ø 1.7 — 3" 38.1 — 101.6 mm 1.5 — 4"
MR
Performance Load capacity (Fm): 2 x 50 kg (2 x 110 lb)
Fm
Fm
Rotational Slip Resistance (MR)
FWind
Use ultimate loads to calculate the resulting torque
Circular Parent member Ø mm (in)
Torque in Nm
42.3 (1.7)
304
48.3 (1.9)
356
60.3 (2.4)
460
76.1 (3)
596
Parts list Part
Material
Quantity
Bracket
S355MC HDG
4
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4060
508 (20)
101.6 (4)
76.2 (3)
5.4 (12)
© 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
47
© 2021 MAFI AB. All rights reserved.
48
Article 8411 Article 8411
US Specific Products
MAFI 8411 Large Radio Mount
Content of kit About the Product
8411
Designed to mount two large radios to a 2.5-5.6" OD pipe.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 8411 Please visit www.mafigroup.com for regional contact information.
© 2021 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
8411 Article 8411
US Specific Products
Measurements in mm (in)
Parent member Ø 64–142 mm Ø 2.5–5.6''
Performance
Load capacity (Fm): 90 kg (200 lb)
Fm Fm
Parts list Part
Material
Quantity
Clamp
S355MC HDG
4
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
8411
460 (18)
152 (6)
102 (4)
6.0(13.2)
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. 2021 MAFI MAFI AB. AB. All All rights rightsreserved. reserved. © 2021
8411
49
50
Rev A Rev A
Article 6070/6072
MAFI 6070, 6072 RRH Mounting Bracket
MAFI 6070
About the Product Designed to accommodated a wide range of RRHs mounted on different type of parent members (angular, square and tubular).
Flexibility The single RRH Bracket 6070 has been engineered not only for a fast installation, but also in order to carry a load up to 40 kg (88 Ib). The bracket is not only a well balance and robust product, it’s perfectly designed to keep the distance between the RHH and the parent member to a minimum in order to not increase the impact of heavy wind loads and rotation slip effect.
MAFI 6072
The same goes for the dual version, 6072 which makes it possible to install up to two RRHs on each side of the parent member. (40 kg (88 Ib) /bracket) All necessary fasteners are delivered with the 6070 or 6072 including bolts and nuts for anchoring the RRH. The bracket is compatible with the following RRH (AHPMDA serie / AHPMDD serie/ AHHB serie / AHEGB serie / AHEGC serie/ AZQJ serie ).
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. MAFI 6070 MAFI 6072 Please visit https://www.mafigroup.com/how-to-order/ for regional contact information. © 2021 MAFI Group AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Article 6070/6072
Rev A
51
Rev A
Measurements in millimeters (inches)
MAFI 6070
MAFI 6072
Content of kit
MAFI 6070
© 2021 MAFI Group AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
MAFI 6072
Rev A Rev A
52
Article 6070/6072
Performance Load capacity (Fm) 6070: 40 kg (88.2 lb) Load capacity (Fm) 6072: 2 x 40 kg (2 x 88.2 Ib)
Parent member 6070: 35 × 35–80 × 80 mm 1.4 × 1.4–3.1 × 3.1 in 6070: Ø 25–114 mm Ø 1–4.5 in 6072: Ø 45–114 mm Ø 1.8–4.5 in 6070: 35 × 35–80 x 80 mm 1.4 × 1.4–3.1 × 3.1 in 6072: 40 × 40–80 x 80 mm 1.6 × 1.6–3.1 × 3.1 in
Fm
Parts list Part
Material
Quantity 6070
Quantity 6072
Bracket
S355MC HDG
2
4
Clamp
S355MC HDG
2
-
Threaded Rod M10
8.8 HDG
4
4
Fasteners
8.8 HDG
Incl.
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
6070
274 (10.8)
184 (7.3)
78 (3.1)
3.85 (8.5)
6072
279 (11)
244 (9.6)
78 (3.1)
4.67 (10.3)
6070
6072
© 2021 MAFI Group AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
53
© 2021 MAFI AB. All rights reserved.
54
© 2021 MAFI AB. All rights reserved.
55
Antenna Brackets
MAFI 3059 GPS Mount
MAFI 3115 Antenna Offset
Page 56
Page 60
MAFI 3117 Antenna Offset Large Page 62
MAFI 5002 Slim Antenna Mount Page 66
© 2021 MAFI AB. All rights reserved.
56
Rev 2 Rev A
Article 3059 1 (3)
MAFI 3059 GPS Mount
About the Product
0° tilt
Designed to carry a GPS unit attached to a vertical or inclined structural leg member. Back clamp is equipped with slotted holes for easy pre-assembling on the ground. The arm can be tilted 0° — 10°, and is designed with cable routing holes.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3059 Please visit https://www.mafigroup.com/how-to-order/ for regional contact information.
10° tilt 3059 © 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Article 3059
Rev 2 Rev A
Measurements in millimeters (inches)
Content of kit
© 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
57 2 (3)
58
Rev 2Rev A
Article 3059 3 (3)
Parent member 35 × 35—80 × 80 mm 1.4 x 1.4—3.1 x 3.1 "
Ø 25—114.3 mm Ø 1—4.5 "
35 × 35—80 × 80 mm 1.4 x 1.4—3.1 x 3.1 "
Performance Load capacity (Fm): 2 kg (4.4 lb) Maximum tilt: 10°
Fm
Parts list Part
Material
Quantity
Offset Arm
S235MC HDG
1
Tilt Bracket
S275MC HDG
1
Clamp
S355MC HDG
1
Threaded Rod M10
8.8 HDG
2
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3059
430 (16.9)
126 (5)
46 (1.8)
1.9 (4.2)
© 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
59
© 2021 MAFI AB. All rights reserved.
60
Rev 6
*Article 3115/3116 *Article 3115/3116/31154
MAFI 3115* Antenna Offset
Designed to allow for radios to be mounted behind a panel antenna without any extra equipment pole.
Flexibility The offset bracket can handle a wide range of tower and mast leg sections. The bracket fits either directly against the antenna or tilt brackets if used. Hole pattern for equipment is c/c 32–72 mm (1.26–2.83 in). The optional 31155 antenna adaptor kit allows mounting of antennas with c/c 110 mm (4.33 in), 120 mm(4.72 in) and 150 mm (5.91 in).
Additional Data
3115 with option 31155, antenna adaptor kit
For more detailed product data see sections Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3115 or E-order number (SEG): 6062514 3116 or E-order number (SEG): 6000951 31155
Content of kit 3115 Content of kit 3116
Contact information can be found at www.mafigroup.com
© 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
*Article 3115/3116/31154
Rev 6
*Article 3115/3116
Rev 6
61
Measurements in mm (in)
3115 Parent member Ø 25–76.1 mm Ø 1–3 in
Performance
3116
Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm) 3115/-16: 50 kg (110.2 lb) Rot. slip resistance (MR): See Rotational Slip Table
Ft 31155
MR Fm
Parts list Part
Material
Quantity
Offset plate
S355MC HDG
2
Clamp
S355MC HDG
2
U-bolt
A4 or 8.8 HDG
2
Fasteners
8.8 HDG/A4
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3115
250 (9.8)
150 (5.9)
100 (3.9)
4 (8.8)
Product options 31154: Antenna adaptor kit. Optional for both 3115 and 3116. © 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
3115
3116
EN 1090
62
Rev 3 Rev 3
*Article 3117 Family 1 (3)
MAFI 3117 Family* Antenna Offset Large
MAFI 3117
About the Product Designed to allow for radios to be mounted behind a panel antenna without any extra equipment pole.
Flexibility This larger version of antenna offset can handle a wide range of tower and mast leg section. The brackets hole pattern fits either directly against the antenna or tilt brackets if used. The antenna offset large is suitabel for larger and heavier antennas with a c/c between 32–72 mm (1.26–2.83 in). The optional 31155 antenna adaptor kit allows mounting of antennas with c/c 110 mm (4.33 in), 120 mm(4.72 in) and 150 mm (5.91 in).
MAFI 3119
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. MAFI 3117 MAFI 3119 MAFI 31155
MAFI 31155
Contact information can be found at www.mafigroup.com.
© 2021 MAFI Group AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
*Article 3117 Family
Rev 3 Rev 3
63 2 (3)
Measurements in millimeters (inches)
MAFI 3117
MAFI 31155 MAFI 3119
Content of kit
MAFI 3117
© 2021 MAFI Group AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
MAFI 3119
Rev 3 Rev 3
64
3 (3) *Article 3117 Family
Performance Ultimate design load with offset (Fm1)*: 150 kg (330 lb) Maximum lever arm of equipment mass piont (Lm1): 800 mm (31.4 in) Maximum side load/kit with offset (Mw): 1200 Nm Maximum front force/kit with offset (Fw1): 3800 N Ultimate design load without offset (Fm2)*: 300 kg (660 lb) Maximum lever arm of equipment mass piont (Lm2): 525 mm (20.6 in)
Lm1
Maximum side load/kit without offset (Mw): 1850 Nm Maximum front force/kit without offset (Fw2): 9000 N
Fw1
Ultimate transient man-load (Ft): 2400 N
Fm1
Rot. slip resistance (MR): See Rotational Slip Table *Design loads unfactored
Ft
Parent member Ø 42.3–114.3 mm Ø 1.7–4.5 in
Mw
MR Lm2 Fm2
Parts list Part
Material
Quantity 3117
Quantity 3119
Bracket
S355MC HDG
2
2
Clamp
S355MC HDG
2
6
Threaded Rod M10
8.8 HDG
4
8
Fasteners
8.8 HDG
Incl.
Incl.
Fw2 Ft
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3117
314 (12.4)
185 (7.3)
112 (4.4)
6.7 (14.8)
3119
424 (16.7)
252 (10)
66 (2.6)
10.4 (23)
Product options 31155: Antenna adaptor kit. 3117
3119
EN 1090
© 2021 MAFI Group AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
65
© 2021 MAFI AB. All rights reserved.
Rev B Rev B
66
Article 5002
MAFI 5002 Slim Antenna Mount Use the extra bushings for mounting around small parent members
About the Product Designed to provide a slim antenna mounting close to the parent member. These brackets can be mounted on either circular, angular or box beam members.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 5002 Please visit https://www.mafigroup.com/how-to-order/ for regional contact information.
5002 © 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
1 (3)
Article 5002
Measurements in millimeters (inches)
Content of kit
© 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Rev B Rev B
67 2 (3)
Rev BRev B
68
Article 5002 3 (3)
Offset member 60 x 60 — 80 x 80 mm 2.4 x 2.4 — 3.1 x 3.1"
MR
Ø 60.3 — 114.3 mm Ø 2.4 — 4.5"
FWind
50 x 50 — 80 x 80 mm 2 x 2 — 3.1 x 3.1"
Performance Maximum Horizontal Force per bracket pair (FH): 3300 N
FH
Load capacity (Fm): 70 kg (154 lb)
Rotational Slip Resistance (MR) per bracket pair
Use ultimate loads to calculate the resulting torque
Circular member Ø mm (in)
Torque in Nm
60.3 (2.4)
276
76.1 (3)
358
88.9 (3.5)
424
101.6 (4)
489
114.3 (4.5)
554
Parts list Part
Material
Quantity
Bracket
S355MC HDG
2
Clamp
S355MC HDG
2
Bushing
S355J2H HDG
8
Fasteners
8.8 HDG
Incl.
Fm
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
5002
215 (8.5)
155 (6.1)
70 (2.8)
3.4 (7.5)
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
© 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
69
© 2021 MAFI AB. All rights reserved.
70
© 2021 MAFI AB. All rights reserved.
71
Wall Mount Solutions
MAFI 3541 Medium Duty Wall Mount
MAFI 3544 Large Offset Wall Mount
MAFI 2414 Heavy Duty Wall Mount
Page 72
Page 74
Page 76
MAFI 2415 Remedial Wall Mount
MAFI 43692 Corner Wall Mount
MAFI 8057 Wall Mounted Cabinet Platform
Page 78
© 2021 MAFI AB. All rights reserved.
Page 82
Page 84
72
Rev Rev55
Article 3541 Article 3541
MAFI 3541 Medium Duty Wall Mount
Designed for mounting an equipment pole on a wall. The kit is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.
Flexibility The product can be mounted either directly to brick or concrete walls, or using through-mounts with back plates. Equipment poles can range from Ø 60–114.3 mm (2.4–4.5 in).
Additional Data For more detailed product data see sections Wall Bracket Properties and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3541 or E-order number (SEG): 6062659
Content of kit
Contact information can be found at www.mafigroup.com.
© 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
Article 3541
Rev 5
Article 3541
Rev 5
73
Measurements in mm (in)
Offset member Ø 60–114.3 mm Ø 2.4–4.5 in
Performance Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm): 100 kg (220 lb) Maximum side force/bracket (FS): 1200 N Rot. slip resistance (MR): See Rotational Slip Table
Ft
Fm MR
FS
Parts list Part
Material
Quantity
Wall bracket
S355MC HDG
2
U-bolt M12
8.8 HDG
4
Nut M12
8.8 HDG
16
Washer
8.8 HDG
12
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3541
385 (15.2)
300 (11.8)
90 (3.5)
4.9 (10.8)
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
3541
EN 1090
74
Rev Rev4 4
Article 3544 Article 3544
MAFI 3544 Large Offset Wall Mount
Designed for mounting an equipment pole on a wall when a large clearance is required. The product is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.
Flexibility The product can be mounted either directly to brick or concrete walls, or using through-mounts with back plates. Equipment poles can range from Ø 60–114.3 mm (2.4–4.5 in).
Additional Data For more detailed product data see sections Wall Bracket Properties and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3544 or E-order number (SEG): 6062518 Contact information can be found at www.mafigroup.com.
Content of kit © 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
Rev 4
Article 3544 Article 3544
Rev 4
75
Measurements in mm (in)
Offset member Ø 60–114.3 mm Ø 2.4–4.5 in
Performance Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm): 100 kg (220 lb) Maximum side force/bracket (FS): 2300 N Rot. slip resistance (MR): See Rotational Slip Table
Ft
Fm FS
MR
Parts list Part
Material
Quantity
Wall bracket
S355MC HDG
2
U-bolt M12
8.8 HDG
4
Nut M12
8.8 HDG
16
Washer
8.8 HDG
12
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3544
590 (23.2)
450 (17.7)
150 (5.9)
13.8 (30.4)
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
3544
EN 1090
76
Rev Rev5 5
Article 2414 Article 2414
MAFI 2414 Heavy Duty Wall Mount
Designed to provide a pole mount on a wall.The product is dimensioned to carry heavy poles and equipment in two different configurations.
Flexibility The product can be mounted either directly to brick or concrete wall, or using through-mounts with reinforcement on the back. Equipment poles can range from Ø 101.6–114.3 mm (4–4.5 in).
Additional Data For more detailed product data see sections Wall Bracket Properties and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 2414 or E-order number (SEG): 6000693
Content of kit
Contact information can be found at www.mafigroup.com © 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
Rev 5
Article 2414 Article 2414
Rev 5
77
Measurements in mm (in)
Offset member Ø 101.6–114.3 mm Ø 4–4.5 in
Performance Ultimate transient man-load (Ft): 2.4 kN Maximum side force (FS): 12000 N Rot. slip resistance (MR): See Rotational Slip Table Configuration 1: Load capacity (Fm): 500 kg (1102 lb)
Ft
Configuration 2: Load capacity (Fm): 240 kg (529 lb)
Fm
Fm
Ft MR
FS
Configuration 1
Configuration 2
Parts list Part
Material
Quantity
Cantilever
S355MC HDG
2
Support plate
S355MC HDG
8
Bushing
S355JR HDG
4
U-bolt, M12
8.8 HDG
4
Bolt, M16
8.8 HDG
4
Nut, M16/M12
8.8 HDG
24
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
2414
385 (15.2)
295 (11.6)
200 (7.9)
17 (37.5)
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
2414
EN 1090
78
Rev BRev B
Article 2415 1 (3)
MAFI 2415 Remedial Wall Mount
About the Product Designed to strengthen an existing wall mounted circular member that has been deemed unsuitable. Installation can be carried out while both existing member and equipment are left in place. The adjustable offset arm enables this solution to work with most existing wall mounted assemblies.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 2415 Please visit https://www.mafigroup.com/how-to-order/ for regional contact information.
© 2020 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Article 2415
Rev B Rev B
79 2 (3)
Measurements in millimeters (inches)
Content of kit
© 2020 MAFI AB. All rights reserved © 2021 MAFI AB. All rights reserved.
80
Rev B
Article 2415
Rev B
3 (3)
Offset member Ø 88.9 — 114.3 mm Ø 3.5 — 4.5"
FWind
Ft FR
Performance
Ft
Ultimate transient man-load (Ft): 2.4 kN Ultimate reaction force (FR): 12 000 N 1)
FR
Configuration 1: Load capacity (Fm): 650 kg (1433 lb)
FWind
Configuration 2: Load capacity (Fm): 500 kg (1102 lb) 1)
Fm
Fm
Reaction force to calculated wind load FWind
FR
FR Configuration 1
Rotational Slip Resistance (MR) per bracket pair
Configuration 2
Use ultimate loads to calculate the resulting torque
Circular member Ø mm (in)
Torque in Nm
88.9 (3.5)
1412
101.6 (4)
1632
114.3 (4.5)
1848
MR
Parts list Part
Material
Quantity
Wall plate
S355MC HDG
2
Offset arm
S355MC HDG
4
Support plate
S355MC HDG
4
Offset member clamp
S355MC HDG
4
Bushing
S355J2H HDG
16
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
2415
800 (31.5)
600 (23.6)
320 (12.6)
40 (88.2)
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2020 MAFI AB. All rights reserved
2415
EN 1090
Offset Product
Min Offset
Max Offset
2415 with Ø 88.9 mm Ø 3.5"
120 mm 4.8"
335 mm 13.2"
2415 with Ø 114.3 mm Ø4.5"
125 mm 4.9"
350 mm 13.8"
© 2021 MAFI AB. All rights reserved.
81
© 2021 MAFI AB. All rights reserved.
82
Rev4 4 Rev
Article 43692 Article 43692
MAFI 43692 Corner Wall Mount
Designed to provide a pole mount at the corner of a wall with a clearance of 50 mm (2 in). The product is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.
Flexibility The product can be mounted either directly to brick or concrete walls, or using though-mounts with back plates. Equipment poles can range from Ø 60–114.3 mm (2.4–4.5 in).
Additional Data For more detailed product data see sections Wall Bracket Properties and Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 43692 or E-order number (SEG): 6000694 Contact information can be found at www.mafigroup.com.
Content of kit
© 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
Article 43692
Rev 4
Article 43692
Rev 4
83
Measurements in mm (in)
Offset member Ø 60–114.3 mm Ø 2.4–4.5 in
Performance Ultimate transient man-load (Ft): 2.4 kN Load capacity (Fm): 100 kg (220 lb) Maximum side force/bracket (FS): 2300 N Rot. slip resistance (MR): See Rotational Slip Table
Ft
Fm FS
MR
Parts list Part
Material
Quantity
Wall bracket
S355MC HDG
2
U-bolt M12
8.8 HDG
4
Nut M12
8.8 HDG
16
Washer
8.8 HDG
8
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
43692
800 (31.5)
600 (23.6)
340 (13.4)
12.5 (27.6)
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
43692
EN 1090
84
Rev 22 Rev
Article 8057 8057 Article
MAFI 8057 Wall Mounted Cabinet Platform
Designed as a lightweight wall-mount platform to carry small and medium sized cabinets.
Flexibility The elongated slots and slidable cross beams allows to create the required hole pattern for any cabinet.
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 8057 Contact information can be found at www.mafigroup.com.
Content of kit
© 2021 MAFI AB. All © 2019–2020 All rights rights reserved. reserved.
Rev 2
Article 8057 Article 8057
Rev 2
85
Measurements in mm (in)
Performance
Fm
Load capacity/section (Fm): 300 kg (661 lb)
Fm
Maximum load capacity: 600 kg (1323 lb) Maximum cabinet bolt dimension: M12
Parts list Part
Material
Quantity
Steel beam, long
S355MC HDG
2
Steel beam, short
S355MC HDG
4
L-profile
S355MC HDG
6
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
8057
1400 (55.1)
800 (31.5)
350 (13.8)
57 (125.7)
© 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
8057
86
© 2021 MAFI AB. All rights reserved.
87
Rooftop Solutions Fixed
MAFI 2230 Adjustable Strut Family
MAFI 3022 Adaptor beams Page 92
MAFI 3510 Rafter Bracket Kit Page 94
MAFI 4316 Single Pole Page 96
Page 88
Free Stander
MAFI 4120 Roof Butler Page 98
MAFI 4112 Free Stander Light Page 100
MAFI 4309 Free Stander Medium Page 102
MAFI 4610 Free Standing Corner Mount 2x2 Page 106
MAFI 4611 Free Standing Corner Mount 3x3 Page 110
© 2021 MAFI AB. All rights reserved.
MAFI 4612 Free Standing Corner Mount 4x4 Page 114
MAFI 91110 Extra Pole Kit Page 118
MAFI 4310 Free Stander Platform Page 104
MAFI 8051 Small Adjustable Cabinet Platform Page 120
88
Rev 3
*Article 2230/2231/2232/2233/2234/2235 2230/2231/2232/2233/2234/2235
MAFI 2230* Adjustable Strut Family
Designed to provide flexible bracing to a pole. The struts can be fitted as part of a new installation or retrofitted to an existing pole. All that is required is two structural attachment points within reach of the pole. The attachment points can be horizontal, vertical or anything in between. The kit consists of a pair of adjustable struts with feet and a pole attachment bracket.
Flexibility The 2230-family comprises three lengths of struts and two standard sizes of pole attachment clamps available to fit poles with Ø 76.1 or 114.3 mm (3 in or 4.5 in).
Additional Data For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
Content of kit
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 2230 or E-order number (SEG) 2231 or E-order number (SEG) 2232 or E-order number (SEG) 2233 or E-order number (SEG) 2234 or E-order number (SEG) 2235 or E-order number (SEG)
Option: 4328
Contact information can be found at www.mafigroup.com. © 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
Rev3 3 Rev
*Article 2230/2231/2232/2233/2234/2235 2230/2231/2232/2233/2234/2235
Measurements in mm (in)
89
Parent member
Option 4328
2230/-31/-32: Ø 76.1 mm Ø 3 in 2233/-34/-35: Ø 114.3 mm Ø 4.5 in Optional Ø 76.1 mm (3 in)
Included Foot
Performance Load capacity Ø 76.1 (3 in): Fstrut: 10 000 N Load capacity Ø 114.3 (4.5 in): Fstrut: 15 000 N
Strut length and clamp width
Fstrut
Fstrut
Parts list Part
Material
Quantity
Strut
S355 HDG
2
Strut foot
S355MC HDG
2
Clamp
S355MC HDG
2
U-bolt M12
8.8 HDG
2
Bolt M12
8.8 HDG
4
Fasteners
8.8 HDG
Incl.
Product
X Length m (ft)
Clamp width Ø mm (in)
2230
1.00–1.46 (3.28–4.79)
76.1 (3)
2231
1.35–2.16 (4.43–7.09)
76.1 (3)
2232
2.00–3.46 (6.56–11.35)
76.1 (3)
2233
1.00–1.46 (3.28–4.79)
114.3 (4.5)
2234
1.35–2.16 (4.43–7.09)
114.3 (4.5)
2235
2.00–3.46 (6.56–11.35)
114.3 (4.5)
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
2230
1100 (43.3)
160 (6.3)
100 (3.9)
13.8 (30.4)
Product options 4328: Equipment pole foot. 2240: Strut support for tube Ø 76.1 mm (3 in). 2250: Strut support for tube Ø 114.3 mm (4.5 in). Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. EN 1090 © 2021 MAFI AB. All AB. rights 2019–2020 MAFI Allreserved. rights reserved.
Rev 3
90
How to calculate
*Article 2230/2231/2232/2233/2234/2235 2230/2231/2232/2233/2234/2235
Top view
For an evenly distributed load the recommended angle between struts is 90° as shown in the "Top view" picture. The recommended angle between strut and parent member is 45° as shown in the "Side view" picture.
Calculate strut length "b" Follow this example to calculate the neccessary strut length: The strut is to be fastened at 2.2 meter on the parent member. This is the value for "a" and "b" is to be calculated. b = √(2*a2)
Insert a = 2.2
b = √(2*2.2 ) 2
b = 3.11 The needed strut length is 3.11 meter, which means 2232 or 2235 depending on parent member diameter.
Calculate height and distance "a" Follow this example to calculate how high the strut will be fastened and the distance from the parent member: The strut length "b" is equal to 2.2 meter, and the unknown height and distance "a" is to be calulated. a = b/√2
Insert b = 2.2
a = 2.2/√2
Side view
a = 1.56 The strut is to be fastened at a height of 1.56 meter and at a distance of 1.56 meter. A stability claculation should be done in every case - if you need help, please contact MAFI.
b a=— √2 b = √(2*a2)
© 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
91
© 2021 MAFI AB. All rights reserved.
92
Rev 3
Article 3022 3022 Article
MAFI 3022 Adaptor beams
Enclosure mounted with clamps Designed to work as adaptor beams between a new pole or enclosure and already existing structural beams on site without drilling or welding.
Flexibility The adaptor beams can be mounted either with clamps around existing structural beams, or with spacers and washers on the top flange when there is no space underneath the structural beams. Requires no drilling or welding on site.
Overturning resistance For these adaptor beams the critical dimensioning parameter is the resistance torque and reaction forces when ultimate wind loads are acting on the equipment. Both load cases must be considered when dimensioning equipment, and these limits may not be exceeded.
Option 4316
Enclosure mounted with washers
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3022 Contact information can be found at www.mafigroup.com.
Content of kit
© 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
Article 3022
Rev3 3 Rev
93
Top flange
Measurements in mm (in)
Clamp
Bottom flange
Load case 1: Wind load side
Load case 2: Wind load front
Performance Load capacity: 450 kg (992 lb) Maximum cabinet bolt dimension: M12 Resistance torque MR load case 1: 4075 Nm Resistance torque MR load case 2: 6490 Nm Reaction force FR/bolt load case 1: 3485 N Reaction force FR/bolt load case 2: 5455 N
Fwind
Fwind
FR
FR
FR
FR MR
MR
Parts list Part
Material
Quantity
Adaptor beam
S355MC HDG
2
Clamp
S355MC HDG
4
Threaded rod, M10
8.8 HDG
8
Spacer (5, 8 and 10 mm)
S355MC HDG
24
Square washer, 12 mm
S355MC HDG
8
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3022
1040 (40.9)
170 (6.7)
95 (3.7)
21 (46.3)
Product options 4316: Single pole 1.8 m (3.3 ft) with foot. © 2019–2020 2021 MAFI AB. All AB. rights MAFI Allreserved. rights reserved.
3022
EN 1090
94
Rev 44 Rev
Article 3510 3510
MAFI 3510 Rafter Bracket Kit
Designed to provide a pole mount on to rafters or roof trusses for tubes of Ø 60.3–114.3 mm (2.4–4.5 in).
Flexibility The product can be mounted directly on to the wooden structure using through-mounts with large square washers on the back. The kit consist of high quality steel parts with hot dip galvanization treatment.
Additional Data For more detailed product data see sections Rotational Slip Table. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 3510 or E-order number (SEG): 6000882
4328 Option
Content of kit
Contact information can be found at www.mafigroup.com.
© 2021 MAFI AB. All rights © 2019–2020 rights reserved. reserved.
Rev 4
Article 3510 Article 3510
Rev 4
95
Measurements in mm (in)
FWind
Parent member Wooden beams minimum: 120 × 45 mm 4.7 × 1.8 in.
Offset member Ø 60.3–114.3 mm Ø 2.4–4.5 in
Ft
Performance
FS Fm
Ultimate transient man-load (Ft): 2.4 kN Maximum side force (FS): 10 000 N Load capacity (Fm): 300 kg (661 lb) Rot. slip resistance (MR): See Rotational Slip Table
MR
FS
Parts list Part
Material
Quantity
Bracket
S355MC HDG
4
Threaded rod M12
8.8 HDG
4
Threaded rod M8
A4
14
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
3510
210 (8.3)
160 (6.3)
120 (4.7)
6 (13.2)
Product options 4328: Foot for equipment pole. 53001G: Rubber roof flashing Ø 80–160 mm (3.1–6.3 in). 53003G: Rubber roof flashing Ø 60–125 mm (2.4–4.9 in). Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
3510
EN 1090
96
Rev 33 Rev
Article 4316 4316 Article
MAFI 4316 Single Pole
Designed to carry telecom equipment, either on a free standing platform or existing structutal beams with or without optional adaptor beams.
Flexibility The kit consists of a single 1.8 meter (5.9 ft) pole with a diameter of 76.1 mm (3 in), fasteners and a foot. Foot and pole assembly can be mounted on adaptor beams or a free stander allowing for secure mounting of equipment on, for example, a roof top. When mounted on the free stander 4310 the equipment pole is tiltable up to 6° for vertical alignment.
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4316
Mounted on 3022
Mounted on 4310
Contact information can be found at www.mafigroup.com.
© 2021 MAFI © 2019–2020 MAFI AB. AB. All All rights rights reserved. reserved.
Article 4316
Rev 3
Article 4316
Rev 3
97
Measurements in mm (in)
FWind
Performance Maximum overturning moment (MO): 1720 N Load capacity (Fm): 285 kg (628 lb)
Fm
MO
Parts list Part
Material
Quantity
Foot base
S355MC HDG
1
Tube 1.8 m (5.9 ft)
P235TR1 HDG
1
Fasteners
8.8 HDG
Incl.
Top-hat Pole cover
Polyethylene
1
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4316
1850 (72.8)
350 (13.8)
230 (9.1)
27 (59.5)
Product options 4310: Free stander 3022: Adapter beams © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
4316
EN 1090
98
1 Rev 1
4120 Article 4120
MAFI 4120 Roof Butler
Designed as a free standing equipment pole for low wind-load generating equipment such as RRUs placed in areas of low risk. The 4120 is assembled on site allowing it to be carried by one man alone in components weighing less than 25 kg (55.1 lb).
Flexibility The Roof Butler is horizontally adjustable up to 6°, so that the pole will always be vertical.
Overturning moment For this free standing structure, the critical dimensioning parameter is the ability to resist overturning moment. Wind forces, dimensions and equipment weight must be taken into consideration when designing. This free standing structure must be equipped with a minimum ballast weight of 25 kg (55.1 lb). All equipment must always be placed as evenly distributed as possible. A stability calculation should be done in every case – If you need help, please contact MAFI.
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com.
Content of kit
4120 Contact information can be found at www.mafigroup.com.
© 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
Article Article 4120 4120
Rev1 1 Rev
99
Measurements in mm (in)
Parent member Ø 76.1 mm Ø 3 in
Performance Load capacity (Fm)*: 240 kg (529 lb) (Exluding roof butler weight) Maximum overturning moment (MO): 800 Nm (Including roof butler weight) Lever arm for overturning moment calculation: 0.32 m (1.05 ft) Maximum tilt: 6°
*Minimum ballast weight: 25 kg (55.1 lb) All equipment must always be placed as evenly distributed as possible.
FWind
Fm Parts list Part
Material
Quantity
Support foot
S550 Z600
4
Ball-joint foot
8.8 HDG/Rubber
4
Tube 1 m (3.3 ft)
P235TR1 HDG
1
Suspension band 1 m (3.3 ft)
A4
2
Protective mat
Polyethylene
1
Turnbuckle
8.8 HDG
4
Fasteners
8.8 HDG
Incl.
MO
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4120
1130 (44.5)
310 (12.2)
130 (5.1)
16.7 (36.8)
Product options 42071: Concrete block as ballast weight. © MAFI Allreserved. rights reserved. © 2019–2020 2021 MAFI AB. All AB. rights
4120
100
Rev 4
*Article *Article4112/41121 4112/41121
MAFI 4112* Free Stander Light
Designed as a free standing equipment pole for low wind-load generating equipment such as RRUs placed in areas of low risk. The 4112 is assembled on site allowing it to be carried by one man alone in components weighing less than 25 kg (55.1 lb).
Flexibility The pole on the free stander light is horizontally adjustable up to 6°, so that the pole will always be vertical.
Overturning moment For this free standing structure, the critical dimensioning parameter is the ability to resist overturning moment. The figure stated in "Performance" on the next page must be higher than the moment applied by the ultimate wind loads acting on the pole and the supported equipment. A stability calculation should be done in every case - if you need help, please contact MAFI.
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4112 or E-order number (SEG): 6062548 41121 or E-order number (SEG): 6062641 Contact information can be found at www.mafigroup.com.
Content of kit 4112
Content of kit 41121
© 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
Rev 4
*Article 4112/41121
Rev 4
*Article 4112/41121
101
Measurements in mm (in)
Parent member Ø 60.3 mm Ø 2.4 in
FWind
Performance Maximum overturning moment with 3 concrete blocks* (MO): 265 Nm *Each concrete block must weigh at least 20 kg (44.1 lb)
MO
Parts list Part
Material
Quantity 4112
Quantity 41121
Steel plate
S355MC HDG
2
2
Nut M12
8.8 HDG
19
19
Threaded rod M12
8.8 HDG
3
3
Ballast weight
Concrete
3 × 20 kg (44.1 lb)
3 x 20 kg (44.1 lb)
Screw M12
8.8 HDG
2
2
Washer
8.8 HDG
9
9
Protective mat
-
1
1
Tube 1 m (3.3 ft)
P235TR1 HDG
1
-
4112
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4112
1200 (47.2)
800 (31.5)
340 (13.4)
122 (269)
© 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
41121
102
Rev Rev 77
*Article 4309/43091/43092 4309/43091/43092
MAFI 4309* Free Stander Medium
Designed to carry antennas and other equipment on places where a free standing structure is suitable.
Flexibility This structure provides mounting opportunity without penetrating weatherproofing layers on rooftops. The ballast in the structure can be varied to suit the wind load and there’s a lot of space for mounting equipment. The equipment pole is horizontally adjustable up to 6° so that it always can be kept vertical.
4309 with 1 layer option 42071
Overturning moment For this free standing structure the critical dimensioning parameter is the ability to resist overturning moment. The figures stated in "Performance" on the next page must be higher than the moment applied by the ultimate wind loads acting on the pole and the supported equipment. The roof structure should to be checked by an engineer to confirm that it can withstand the total weight of the structure. Also it should be confirmed that the friction between the free stander's rubber mat and the roof is enough to prevent sliding.
Content of kit 43091
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4309 or E-order number (SEG): 6062564 43091 43092 or E-order number (SEG): 6062656 Contact information can be found at www.mafigroup.com.
Content of kit 43092
Content of kit 4309
© 2021 MAFI © 2019–2020 MAFI AB. AB. All All rights rightsreserved. reserved.
*Article 4309/43091/43092
Rev 7
*Article 4309/43091/43092
Rev 7
103
Measurements in mm (in)
4309
4309/-1/-2
Performance Tube thickness: 2.9 mm (0.1 in) Maximum tilt: 6° Maximum overturning moment (MO) with 4 concrete blocks*: 1000 Nm Maximum overturning moment (MO) with 8 concrete blocks*: 1600 Nm *Each concrete block must weigh at least 25 kg (55 lb).
FWind
43091
Parts list Part
Material
Quantity 4309
Quantity 43091
Quantity 43092
S355MC HDG
4
4
4
Cross
S355MC HDG
1
1
1
Foot
S355MC HDG
1
1
1
Tube, 3 m (9.8 ft)
P235TR1 HDG
1
-
-
Tube, 1 m (3.3 ft)
P235TR1 HDG
-
1
-
Strut
S355MC/P235TR1 HDG
4
-
4
Protective mat
Polyethylene
1
1
1
Fasteners
8.8 HDG
Incl.
Incl.
Incl.
MO
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4309
1200 (47.2)
800 (31.5)
340 (13.4)
111 (244.7)
4309
Product options 42071: Concrete block to increase ballast weight. Tubes of various lengths can be ordered from MAFI. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
43091
43092
EN 1090
104
Rev 3
4310 Article 4310
MAFI 4310 Free Stander Platform
Designed to carry equipment on places where a free standing structure is suitable. The platform comes with a rubber mat to prevent sliding and to protect the underlaying surface.
Flexibility The ballast in the structure can be varied to suit the wind load and there is plenty of space for mounting equipment. Cross pattern is designed for option 4316. When used together the equipment pole is horizontally adjustable up to 6° for a vertical alignment.
Overturning moment For this free standing structure the critical dimensioning parameter is the ability to resist overturning. The figures stated in "Performance" on the next page must be higher than the moment applied by the ultimate wind loads acting on the equipped free stander. The roof structure should to be checked by an engineer to confirm that it can withstand the total weight of the structure. Also it should be confirmed that the friction between the free stander's rubber mat and the roof is enough to prevent sliding.
Option 4316
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com.
Content of kit
4310 Contact information can be found at www.mafigroup.com. © 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
Article 4310
Rev 3
Article 4310
Rev 3
105
Measurements in mm (in)
Performance Maximum tilt: 6° Maximum overturning moment (MO) with 4 concrete blocks*: 870 Nm Maximum overturning moment (MO) with 8 concrete blocks*: 1470 Nm *Each concrete block must weigh at least 25 kg (55 lb).
FWind
MO Parts list Part
Material
Quantity
S355MC HDG
4
Cross
S355MC HDG
1
Protective mat
Polyethylene
1
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4310
1200 (47.2)
800 (31.5)
340 (13.4)
65.7 (144.8)
Product options 4316: Single pole 1.8 m (5.9 ft) with foot. 42071: Concrete block to increase ballast weight. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
4310
EN 1090
106
Rev A Rev A
Article 4610 Article 4610
MAFI 4610 Free Standing Corner Mount 2x2
Designed to provide mounting oportunity for antennas and other equipment on locations where free standing solutions are needed.
About the Product
4610
This freestanding structure delivers robust rooftop equipmentpole(s) without the need to penetrate weatherproofing layers. Adjustable ballast-carrying cross beams enable the use of different sizes of concrete paving slabs depending on availability. The pole(s) can be kept vertical even when the surface is sloping up to 4°. The default pole size is Ø114.3 (4.5in) (Designer to confirm length and section), but you can also specify Ø76.1 (3in) by using the product option U-bolt 2801-1. The poles can be folded flat, facilitating both installation and maintenance.
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on page four.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4610 Contact information can be found at www.mafigroup.com. Content of kit 4610
© 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Article 4610
Rev A
Article 4610
107
Rev A
Measurements in millimeters [inches]
New features
Folded pole
Cone with tilt function fits 76 and 114 mm Struts
Leveling washers
Parts list Part
Material
Quantity 4610
Cone kit
S355MC HDG
1
Frame kit
S355J2H HDG S355MC HDG Cell polyethylene RG 100
1
Additional kit
S355MC HDG 8.8 HDG or equivalent
1
Strut
P235TR1 HDG
2
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4610
1250 (49.2)
350 (13.8)
350 (13.8)
65 (143.3)
Product options 42071: Concrete block to increase ballast weight. Weight 28 kg (62 lb) / Concrete block. 91124: Additional strut for yoke arms to be attached to Ø 76.1 mm (3 in) pole. 2801-1: U-bolt kit to fit Ø 76.1 mm (3 in) pole.
4610
EN 1090
For more product options, see last page in this product sheet. Poles of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
108
Rev A
Article 4610
Rev A
Article 4610
Parent member Ø 114.3 mm / Ø 4.5 in Ø 76.1 mm / Ø 3 in (optional) Recommended maximum tilt: 4°
Ballast block capacity 4610: Half ballast: 4 pcs 42071 Full ballast: 8 pcs 42071 Maximum ballast weight: 224 kg (494 lb)
FWind
Design resistance data The load limits given in this data sheet apply to the MAFI product only. The designer should always check that the supporting structure can safely carry the loads applied to it by the MAFI product.
Overturning moment For this family of freestanding structures the critical dimensioning parameter is the ability to resist overturning. The figures in the overturning moment table need to be higher than the moment applied by the design wind loads (i.e ultimate load including load factors) acting on the pole and the supported equipment. The roof structure should be checked by an engineer to confirm that it can withstand the total weight of the structure. Also it should be confirmed that the friction between the product´s rubber mat and the roof is enough to prevent sliding.
Custom calculations For custom calculations regarding design resistance for overturning, use the formula and the table below. The maximum allowed ballast stated on previous page and overturning moment in table below is not to be exceeded. MO = (Ballast weight* + Product weight) × 9.81 × Lever arm Product
Lever arm m (ft)
Product weight kg (lb)
Max overturning moment MO (Nm)
4610
0.58 (1.9)
48.5 (106.9)
1410
MO
Lever arm
* When using formula above to calculate overturning moment, use ballast weight of 25 kg (55 lb) per each 42071 concrete block.
© 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Article 4610
Rev Rev A A
109
Platform options
© 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
110
Rev A Rev A
Article 4611 Article 4611
MAFI 4611 Free Standing Corner Mount 3x3
Designed to provide mounting oportunity for antennas and other equipment on locations where free standing solutions are needed.
About the Product This freestanding structure delivers robust rooftop equipmentpole(s) without the need to penetrate weatherproofing layers. Adjustable ballast-carrying cross beams enable the use of different sizes of concrete paving slabs depending on availability. The pole(s) can be kept vertical even when the surface is sloping up to 4°. The default pole size is Ø114.3 (4.5in) (Designer to confirm length and section), but you can also specify Ø76.1 (3in) by using the product option U-bolt 2801-1. The poles can be folded flat, facilitating both installation and maintenance.
4611
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on page four.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4611 Contact information can be found at www.mafigroup.com.
Content of kit 4611
© 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Article 4611
Rev A
Article 4611
111
Rev A
Measurements in millimeters [inches]
New features
Folded pole
Cone with tilt function fits 76 and 114 mm Struts
Leveling washers
Parts list Part
Material
Quantity 4611
Cone kit
S355MC HDG
1
Frame kit
S355J2H HDG S355MC HDG Cell polyethylene RG 100
1
Additional kit
S355MC HDG 8.8 HDG or equivalent
1
Strut
P235TR1 HDG
2
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4611
1750 (68.9)
350 (13.8)
350 (13.8)
105 (231.5)
Product options 42071: Concrete block to increase ballast weight. Weight 28 kg (62 lb) / Concrete block. 91124: Additional strut for yoke arms to be attached to Ø 76.1 mm (3 in) pole. 2801-1: U-bolt kit to fit Ø 76.1 mm (3 in) pole.
4611
EN 1090
For more product options, see last page in this product sheet. Poles of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Rev A
112
Article 4611
Rev A
Article 4611
Parent member Ø 114.3 mm / Ø 4.5 in Ø 76.1 mm / Ø 3 in (optional) Recommended maximum tilt: 4°
Ballast block capacity 4611: Half ballast: 9 pcs 42071 Full ballast: 18 pcs 42071 Maximum ballast weight: 504 kg (1111 lb)
FWind
Design resistance data The load limits given in this data sheet apply to the MAFI product only. The designer should always check that the supporting structure can safely carry the loads applied to it by the MAFI product.
Overturning moment For this family of freestanding structures the critical dimensioning parameter is the ability to resist overturning. The figures in the overturning moment table need to be higher than the moment applied by the design wind loads (i.e ultimate load including load factors) acting on the pole and the supported equipment. The roof structure should be checked by an engineer to confirm that it can withstand the total weight of the structure. Also it should be confirmed that the friction between the product´s rubber mat and the roof is enough to prevent sliding.
Custom calculations For custom calculations regarding design resistance for overturning, use the formula and the table below. The maximum allowed ballast stated on previous page and overturning moment in table below is not to be exceeded. MO = (Ballast weight* + Product weight) × 9.81 × Lever arm Product
Lever arm m (ft)
Product weight kg (lb)
Max overturning moment MO (Nm)
4611
0.83 (2.7)
74.0 (163.1)
4260
MO
Lever arm
* When using formula above to calculate overturning moment, use ballast weight of 25 kg (55 lb) per each 42071 concrete block.
© 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Article 4611 Article 4611
Rev A Rev A
113
Platform options
© 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
114
Rev A Rev A
Article 4612 Article 4612
MAFI 4612 Free Standing Corner Mount 4x4
4612 Designed to provide mounting oportunity for antennas and other equipment on locations where free standing solutions are needed.
About the Product This freestanding structure delivers robust rooftop equipmentpole(s) without the need to penetrate weatherproofing layers. Adjustable ballast-carrying cross beams enable the use of different sizes of concrete paving slabs depending on availability. The pole(s) can be kept vertical even when the surface is sloping up to 4°. The default pole size is Ø114.3 (4.5in) (Designer to confirm length and section), but you can also specify Ø76.1 (3in) by using the product option U-bolt 2801-1. The poles can be folded flat, facilitating both installation and maintenance.
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on page four.
How to Order
Content of kit 4612
To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4612 Contact information can be found at www.mafigroup.com.
© 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Article 4612 Article 4612
Rev A Rev A
115
Measurements in millimeters [inches]
New features
Folded pole
Cone with tilt function fits 76 and 114 mm Struts
Leveling washers
Parts list Part
Material
Quantity 4612
Cone kit
S355MC HDG
1
Frame kit
S355J2H HDG S355MC HDG Cell polyethylene RG 100
1
Additional kit
S355MC HDG 8.8 HDG or equivalent
1
Strut
P235TR1 HDG
2
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4612
2300 (90.6)
350 (13.8)
350 (13.8)
137 (302)
Product options 42071: Concrete block to increase ballast weight. Weight 28 kg (62 lb) / Concrete block. 91124: Additional strut for yoke arms to be attached to Ø 76.1 mm (3 in) pole. 2801-1: U-bolt kit to fit Ø 76.1 mm (3 in) pole.
4612
EN 1090
For more product options, see last page in this product sheet. Poles of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Rev A
116
Article 4612
Rev A
Article 4612
Parent member Ø 114.3 mm / Ø 4.5 in Ø 76.1 mm / Ø 3 in (optional) Recommended maximum tilt: 4°
Ballast block capacity 4612: Half ballast: 16 pcs 42071 Full ballast: 32 pcs 42071 Maximum ballast weight: 896 kg (1975 lb)
FWind
Design resistance data The load limits given in this data sheet apply to the MAFI product only. The designer should always check that the supporting structure can safely carry the loads applied to it by the MAFI product.
Overturning moment For this family of freestanding structures the critical dimensioning parameter is the ability to resist overturning. The figures in the overturning moment table need to be higher than the moment applied by the design wind loads (i.e ultimate load including load factors) acting on the pole and the supported equipment. The roof structure should be checked by an engineer to confirm that it can withstand the total weight of the structure. Also it should be confirmed that the friction between the product´s rubber mat and the roof is enough to prevent sliding.
Custom calculations For custom calculations regarding design resistance for overturning, use the formula and the table below. The maximum allowed ballast stated on previous page and overturning moment in table below is not to be exceeded. MO = (Ballast weight* + Product weight) × 9.81 × Lever arm Product
Lever arm m (ft)
Product weight kg (lb)
Max overturning moment MO (Nm)
4612
1.10 (3.6)
107.5 (237)
9790
MO
Lever arm
* When using formula above to calculate overturning moment, use ballast weight of 25 kg (55 lb) per each 42071 concrete block.
© 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
Article 4612 Article 4612
Rev A Rev A
117
Platform options
© 2021 MAFI AB. All rights reserved
© 2021 MAFI AB. All rights reserved.
118
Rev33 Rev
Article 91110 Article 91110
MAFI 91110 Extra Pole Kit
91110 mounted on 4611
Designed to provide mounting opportunity for an extra tube on the Free Standing Corner Mounts 4611 and 4612.
Flexibility Kit for mounting an extra 76.1 mm (3 in) tube to 4611 or 4612. The recommended maximum length of tube is 1.5 m (4.9 ft). Easily mounted when assembling the Free Standing Corner Mount or added onto already built structures.
Overturning moment All resistance data accoring to platform 4611 or 4612.
Additional Data
91110 mounted on 4612
For package data see section Package Data. Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com.
Content of kit
91110 Contact information can be found at www.mafigroup.com.
© 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
Rev 3
Article 91110 91110
119
Parent member Ø 76.1 mm Ø 3 in
X
Mounted on 4611: X = 1250 mm–1700 mm (49.2 in–66.9 in) Mounted on 4612: X = 600 mm–1250 mm (23.6 in–49.2 in)
Parts list Part
Material
Quantity
Strut
P235TR1 HDG
2
Frame corner with cone
S355MC HDG
1
Fasteners
8.8 HDG or equivalent
Incl.
Product options 4611: Free Standing Corner Mount medium 4612: Free Standing Corner Mount large Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
91110
2300 (90.6)
300 (11.8)
200 (7.9)
22 (48.5) 91110
© 2019–2020 MAFI AB. All rights reserved.
© 2021 MAFI AB. All rights reserved.
EN 1090
120
Rev 3
MAFI 8051* Small Adjustable Cabinet Platform
*Article *Article8051/91100/91101 8051/91100/91101
MAFI 8051
MAFI 91100
Lightweight platform designed to provide a level base for up to 2 cabinets placed in areas of low risk.
Flexibility The elongated slots and slidable cross beams allow you to create the hole pattern you need for any cabinet. The ball-jointed feet allow you to compensate for a maximum roof slope of 6°.
MAFI 91101 Concrete blocks to be ordered separately
Outriggers can be specified in following lengths: 8051: 1100 mm (43.3 in) 91100: 1500 mm (59.1 in) 91101: 2000 mm (78.7 in)
Overturning moment For this family of freestanding platforms the critical dimensioning parameter is the ability to resist overturning. Wind forces, dimensions and weights of the cabinets must be taken into consideration when designing a platform solution. A stability calculation should be done in every case – If you need help, please contact MAFI. The roof structure should be checked by an engineer to confirm that it can withstand the total weight of the structure. Also it should be confirmed that the friction between the product´s rubber mat and the roof is enough to prevent sliding.
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 8051 or E-order number (SEG): 6000692 91100 91101 Contact information can be found at www.mafigroup.com. © 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
*Article 8051/91100/91101
Rev 3
*Article 8051/91100/91101
Rev 3
121
Measurements in mm (in)
Performance Load capacity/section (Fm): 300 kg (661 lb) Maximum load capacity: 600 kg (1323 lb) Maximum cabinet bolt dimension: M12
8051
Maxiumum tilt: 6°
91100
91101 Fm
Fm
FWind
Parts list Part
Material
Quantity 8051
Quantity 91100
Quantity 91101
Steel beam, long
S355MC HDG
2
2
2
Steel beam, short
S355MC HDG
4
4
4
Ball-jointed foot
Plastic and A2
4
4
4
Stub outrigger
S355MC HDG
4
-
-
Outrigger, 1500 mm (59.1 in)
S355MC HDG
-
2
-
Outrigger, 2000 mm (78.7 in)
S355MC HDG
-
-
2
Protective mat
-
4
4
4
Fasteners
8.8 HDG
Incl.
Incl.
Incl.
MO
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
8051
1400 (55.1)
800 (31.5)
350 (13.8)
86 (189.6)
91100
Product options 42071: Concrete block as foot support. © 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
8051
91101
EN 1090
122
© 2021 MAFI AB. All rights reserved.
123
Accessories
MAFI 32655 Cable Holder Family
MAFI 7000 Stainless Steel 10-hole Groundbar
Page 124
Page 126
US Specific Products
US Specific Products
MAFI 4260, 4261, 4262 Antenna Cable Holder Family
MAFI 4270, 4271 Radio Cable Holder Family
Tubes, beams, threaded rods and U-bolts
Various Accessories
Page 128
Page 132
© 2021 MAFI AB. All rights reserved.
Page 130
Page 134
124
Rev 4
*Article 32655/32657/32658/32660/32663/32664 32655/32657/32658/32660/32663/32664 *Article
MAFI 32655* Cable Holder Family
Designed as an easily-fitted tower-leg clamp to accommodate a number of feeder cables.
Flexibility The different models in the family can accommodate tubular tower-legs ranging from Ø 20–193 mm (0.8–7.6 in), and angle legs from 60 × 60–130 × 130 mm (2.4 × 2.4–5.1 × 5.1 in).
32655/-57/-58
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-codes on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com.
32660/-63
32655 or E-order number (SEG): 6062533 32657 or E-order number (SEG): 6000695 32658 or E-order number (SEG): 6000696 32660 or E-order number (SEG): 6062534 32663 or E-order number (SEG): 6000697 32664 or E-order number (SEG): 6000698 Contact information can be found at www.mafigroup.com.
32664 © 2021 MAFI AB. All rights reserved. © 2019–2020 reserved.
*Article 32655/32657/32658/32660/32663/32664
Rev 4 Rev 4
*Article 32655/32657/32658/32660/32663/32664
125
Measurements in mm (in)
32655/-57/-58
Parent member 32664: 60 × 60 mm–130 × 130 mm 2.4 × 2.4 in–5.1 × 5.1 in
32655: Ø 20–50 mm Ø 0.8–2 in 32657: Ø 40–76.1 mm Ø 1.6–3 in 32658: Ø 88.9–114.3 mm Ø 3.5–4.5 in
32660/-63/-64
32660: Ø 35–76.1 mm Ø 1.4–3 in 32663: Ø 88.9–114.3 mm Ø 3.5–4.5 in 32664: Ø 76.1–193 mm Ø 3–7.6 in
Parts list Quantity
Quantity
32655/57/58/60/63
32664
S355MC HDG
1
1
Clamp
S355MC HDG
-
1
U-bolt M12
A4 or 8.8 HDG
1
-
Nut M12
8.8 HDG
4
8
Washer
8.8 HDG
2
4
Part
Material
Bracket
32655/-57/-58
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
32655/57/58
400 (15.7)
100 (3.9)
50 (2)
1.2 (2.6)
© 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
32660/-63
32664
126
Rev Rev 44
Article Article7000 7000
MAFI 7000 Stainless Steel 10-hole Groundbar
Designed to be used as a groundbar for towers and feeder runs.
Flexibility The groundbar can easily be fitted to round members from Ø 42–76.1 mm (1.7–3 in) or angle members up to 50 × 50 mm (2 × 2 in). It can also be readily attached to cable ladder, cable tray and C-channel members.
Additional Data Additional information for this product can be found at www.mafigroup.com, or use the QR-code on next page.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 7000 or E-order number (SEG): 6062665 Contact information can be found at www.mafigroup.com.
© 2021 MAFI © 2019–2020 MAFI AB. AB. All All rights rights reserved. reserved.
Rev 4
Article 7000 Article 7000
Rev 4
127
Measurements in mm (in)
Parent member Ø 42–76.1 mm Ø 1.7–3 in
Up to 50 x 50 mm Up to 2 x 2 in
Rail anchor, inner dimension: Up to 49 mm Up to 1.9 in
Parts list Part
Material
Quantity
Plate
A2
1
U-bolt
A4
1
Bolt M8/M6
A2
12
Nut M8
A2
10
Washer M8/M6
A2
34
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
7000
390 (15.4)
370 (14.6)
50 (2)
0.5 (1.1)
© 2019–2020 MAFI AB. All rights reserved. © 2021 MAFI AB. All rights reserved.
7000
128
US Specific Products
Article 4260/4261/4262 4260/4261/4262 Article
MAFI 4260 4261 4262 Antenna Cable Holder Family
Content of kit
About the Product Designed to hold cables with standard snap-ins. Fits 2.375" OD and 2.875" OD pipes. Add extension kit 4261 to the base kit 4260 to make it into the complete product 4262.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4260 4261 4262 Please visit www.mafigroup.com for regional contact information.
©©2021 2021 MAFI MAFI AB. AB. All All rights rights reserved.
Article Article 4260/4261/4262 4260/4261/4262
US Specific Products
Measurements in mm (in)
Parent member Ø 60–76 mm Ø 2.4–3.0''
Parts list Part
Material
Quantity 4260
Bracket
S355MC HDG or equivalent
1
Bar
S355MC HDG or equivalent
U-bolt
8.8 HDG or equivalent
Fasteners
8.8 HDG or equivalent
Quantity 4261
Quantity 4262 1
1
1
1
1
1
Incl.
Incl.
Incl.
4260
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4260
394 (15.5)
140 (5.5)
51 (2.0)
1.0 (2.2)
4261
254 (10.0)
51 (2.0)
51 (2.0)
0.3 (0.7)
4262
394 (15.5)
140 (5.5)
51 (2.0)
1.3 (2.9)
4261
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI.
© 2021 MAFI AB. AB. All All rights rightsreserved. reserved. 2021 MAFI
4262
129
130
Article 4270/4271 4270/4271 Article
US Specific Products
MAFI 4270 4271 Radio Cable Holder Family
Content of kit About the Product
4270
Designed to hold cables with standard snap-ins. Fits 2.375" OD and 2.875" OD pipes.
How to Order To order this kit, please contact MAFI quoting article number or visit our webshop www.mafigroup.com. 4270 4271 Please visit www.mafigroup.com for regional contact information.
4271
©©2021 2021 MAFI MAFI AB. AB. All All rights rights reserved.
Article Article 4270/4271 4270/4271
US Specific Products
Measurements in mm (in)
Parent member Ø 60–76 mm Ø 2.4–3.0''
Parts list Part
Material
Quantity
Offset Arm
S355MC HDG
1
U-bolt
8.8 HDG
1
Fasteners
8.8 HDG
Incl.
Package data Product
Length mm (in)
Width mm (in)
Height mm (in)
Weight kg (lb)
4270
457 (18)
102 (4.0)
38 (1.5)
1.2 (2.6)
4271
200 (8.0)
100 (4.0)
50 (2.0)
0.6 (1.0)
4270
Product options Tubes of various lengths, diameters and wall thicknesses can be ordered from MAFI. © 2021 2021 MAFI MAFI AB. AB. All All rights rightsreserved. reserved.
4271
131
Rev 3
132
Tubes and Beams
Tubes and Beams
The MAFI range of tubes can be ordered in different standard lengths. The tables below contain information about material, dimension and weight. Order by entering article number with the appendix indicating the length. Ex: GT60329-20 GT60329-20: Galvanized Tube. GT60329-20: Outer Ø: 60.3 mm (2.4 in) and wall thickness: 2.9 mm (0.1 in). GT60329-20: Length: 2000 mm (78.7 in). All measurements in mm (in) and kg (lb) if not stated otherwise.
Steel Tubes P235TR1 HDG Article no. (Circular profile)
Outer Ø mm (in)
Wall thickness mm (in)
Weight (kg per m)
Article no. corresponding to available length (ex. 2000 mm length corresponds to -20)
GT483325-XX
48.3 (1.9)
3.25 (0.13)
3.61
-033, -10, -30
GT60329-XX
60.3 (2.4)
2.90 (0.11)
4.11
-10, -15, -20, -25, -30, -60
GT76129-XX
76.1 (3)
2.90 (0.11)
5.24
-075, -10, -15, -20, -25, -30, -40, -60
GT76145-XX
76.1 (3)
4.50 (0.18)
7.96
-10, -15, -20, -30, -60
GT88932-XX
88.9 (3.5)
3.20 (0.13)
6.76
-10, -15, -20, -25, -30, -40, -60
GT101636-XX
101.6 (4)
3.60 (0.14)
8.70
-10, -20, -25, -30, -60
GT114336-XX
114.3 (4.5)
3.60 (0.14)
9.83
-075, -10, -15, -20, -25, -30, -40, -60
GT114350-XX
114.3 (4.5)
5.00 (0.2)
13.51
-10, -15, -20, -30, -40, -60
Aluminium Tubes EN AW-6082T6 nature anodized 20μm Article no. (Square profile)
Dimension mm (in)
Wall thickness mm (in)
Weight (kg per m)
Article no. corresponding to available length (ex. 2000 mm length corresponds to -20)
AT605-XX
60.3 (2.4)
5.00 (0.2)
2.33
-10, -15, -17, -20, -25, -30, -60
AT755-XX
75 (2.9)
5.00 (0.2)
3.02
-20, -30, -60
Steel Beams S355J2H HDG Article no. (Square profile)
Dimension mm (in)
Wall thickness mm (in)
Weight (kg per m)
Article no. corresponding to available length (ex. 2000 mm length corresponds to -20)
GB50503-XX
50 × 50 (2 × 2)
3.00 (0.12)
4.32
-07, -10, -12, -15, -20, -30, -60
GB50505-XX
50 × 50 (2 × 2)
5.00 (0.2)
6.85
-30, -60
GB60603-XX
60 × 60 (2.4 × 2.4)
3.00 (0.12)
5.26
-10, -15, -20, -25, -30, -60 © 2019–2020 © 2021 MAFI MAFI AB. AB. All All rights reserved.
Rev 3 Rev 3
Threaded Rods and U-bolts
Threaded Rods and U-bolts Whole Threaded Rods The MAFI range of whole threaded rods can be ordered in different standard materials, lengths and diameters.
Threaded Rods and U-bolts 133
Article no.
Material
Length mm (in)
9705
A4
1000 (39.4)
M8
33817
HDG 8.8
200 (7.9)
M10
33815
HDG 8.8
250 (9.8)
M10
9535
A4
1000 (39.4)
M10
29272
HDG 8.8
100 (3.9)
M12
23122
HDG 8.8
200 (7.9)
M12
23121
HDG 8.8
250 (9.8)
M12
23131
HDG 8.8
330 (13)
M12
29191
HDG 8.8
400 (15.7)
M12
23651
HDG 8.8
500 (19.7)
M12
9438
HDG 8.8
1000 (39.4)
M12
9562
A4
1000 (39.4)
M12
27851
HDG 8.8
330 (13)
M16
27853
HDG 8.8
400 (15.7)
M16
29291
HDG 8.8
500 (19.7)
M16
9282
HDG 8.8
1000 (39.4)
M16
9671
A4
1000 (39.4)
M16
9281
HDG 8.8
2000 (78.7)
M16
9532
HDG 8.8
1000 (39.4)
M20
9664
HDG 8.8
2000 (78.7)
M20
U-bolts The MAFI range of U-bolts are made of 8.8 HDG or A4 steel. They range in size and shape to fit different member profiles. The U-bolt kits in the table include nuts and washers.
Type A
Type B
Type C
© 2021 MAFI AB. All rights reserved.
Ø metric
Thread length mm (in)
Effective length mm (in)
M8
45 (1.8)
50 (2)
90 (3.5)
M8
95 (3.7)
107 (4.2)
A
81 (3.2)
M10
85 (3.3)
95 (3.7)
3011-1
B
90 (3.5)
M10
70 (2.8)
77.1 (3)
33802-1
A
49 (1.9)
M12
60 (2.4)
112 (4.4)
3380-1
A
62 (2.4)
M12
55 (2.2)
75 (2.9)
33801-1
A
74 (2.9)
M12
60 (2.4)
125 (4.9)
2638-1
A
76.1 (3)
M12
75 (2.9)
88 (3.5)
33803-1
C
74 (2.9)
M12
60 (2.4)
154 (6.1)
2801-1
A
92 (3.6)
M12
91 (3.6)
97 (3.8)
33804-1
A
103 (4.1)
M12
110 (4.3)
150 (5.9)
2867-1
A
130 (5.1)
M12
102 (4)
108 (4.3)
2868-1
A
130 (5.1)
M12
118 (4.6)
170 (6.7)
3572-1
A
144 (5.7)
M12
100 (3.9)
120 (4.7)
2637-1
A
134 (5.3)
M16
60 (2.4)
111 (4.4)
4000-1
A
205 (8.1)
M16
165 (6.5)
187 (7.4)
Ø
Article no.
Type
C–C mm (in)
metric
3756-1
A
70 (2.8)
3013-1
B
2802-1
© 2019–2020 MAFI AB. All rights reserved.
134
Rev 3
Various Accessories
Various Accessories All measurements in mm (in) and kg (lb) if not stated otherwise.
How to order
Top-hat Pole Covers
To order, please contact MAFI quoting article number according to tables.
Designed as a waterproof cover for the top of a pole.
Contact information can be found at www.mafi.se.
Article no.
Tube dimension mm (in)
Wall thickness mm
Height mm (in)
Material
4397
Ø 114.3 (4.5)
-
53 (2.1)
HDG
43971
Ø 76.1 (3)
-
43 (1.7)
HDG
43972
Ø 88.9 (3.5)
-
53 (2.1)
HDG
95361
Ø 48.3 (1.9)
2.5
-
Polyethylene
95362
Ø 76.1 (3)
2.9
-
Polyethylene
95363
Ø 76.1 (3)
4.5
-
Polyethylene
Cable Ladder Cover Plate Designed to provide a protective cover to cable ladders or cable trays. Kit contains mounting material. Article no.
Cable ladder width mm (in)
Plate dimension mm (in)
Hole dimension mm (in)
4406
200 (7.9)
1000 × 200 (39.4 × 7.9)
12 (0.5)
44061
300 (11.8)
1000 × 300 (39.4 × 11.8)
12 (0.5)
44062
400 (15.7)
1000 × 400 (39.4 × 15.7)
12 (0.5)
44063
500 (19.7)
1000 × 500 (39.4 × 19.7)
12 (0.5)
Lightning Protector Designed to protect equipment poles from lightning current. Article no.
Tube dimension mm (in)
Length mm (in)
Bolts metric
439711
Ø 76.1 (3)
520 (20.5)
M6
439720
Ø 88.9 (3.5)
530 (20.9)
M6
43970
Ø 114.3 (4.5)
530 (20.9)
M6
© 2019–2020 © 2021 MAFI MAFI AB. AB. All All rights rights reserved.
Various Accessories
Rev3 3 Rev
135
Protection Mat Designed to prevent damage to roof finish. Article no.
Product fit
Dimension mm (in)
Quantity
2831
42071
550 × 550 × 10 (21.7 × 21.7 × 0.4)
3
42102
4309 (4310
1200 × 1200 × 10 (47.2 × 47.2 × 0.4)
1
42105
4248
Ø 140 × 4 (5.5 × 0.16)
1
42106
4328
129 × 188 × 4 (5.1 × 7.4 × 0.16)
1
Rubber Insert Designed to prevent any cable deformation. Fits any 7/8" cable holder. Article no.
Outer diameter mm (in)
Inner diameter mm (in)
Length mm (in)
2141
Ø 26 (1)
Ø 22 (0.87) × 1 pc.
50 (2)
2142
Ø 26 (1)
Ø 9 (0.35) × 2 pcs.
50 (2)
2143
Ø 26 (1)
Ø 7 (0.28) × 3 pcs.
50 (2)
Rubber Roof Flashings
2141
2143
2142
Designed to effectively seal any round inlets coming through sheet-metal roofs. Article no.
Base size mm (in)
For pipe diameter mm (in)
53003G
205 × 205 (8.1 × 8.1)
Ø 60–125 (2.4–4.9)
53001G
245 × 245 (9.6 × 9.6)
Ø 80–160 (3.1–6.3)
Concrete Plate Designed to act as ballast weight to increase performance of free standing products. Article no.
Base size mm (in)
Weight kg (lb)
42071
500 × 500 × 50 (19.7 × 19.7 × 2)
28 kg (61.7)
Steel band kit Designed to use with steel band solution for fastening brackets to a utility pole. Article no.
Dimension mm (in)
Product fit
Material
Quantity
91131
243 × 30 × 1 (9.6 × 1.2 × 0.04)
1241
A4
1
91133
243 × 30 × 1 (9.6 × 1.2 × 0.04)
5012, 5013
A4
2
91134
236 × 35 × 1 (9.3 × 1.4 × 0.04)
6030
A4
2
© 2019–2020 MAFI Allreserved. rights reserved. 2021 MAFI AB. All AB. rights
Rotational Slip Table
136 Rev 1
Rotational slip table
Rotational Slip Table Design resistance data Use the table below to check for rotational slip when mounting brackets on a circular member. Use the unfactored wind load on the equipment multiplied by the actual offset dimension from the centreline of the parent tube to the centroid of the equipment to calculate the applied torque. The unfactored load is to be used because rotational slip is regarded as a serviceability failure and not a strength failure. The values shown in the table are for a single bracket, so for a normal pair of brackets, the total torque resistance would be double that shown in the table. Each bracket added to the offset pole increases rotational slip resistance by the figure shown in the table. The resistance increases linearly with the diameter of the parent pole. Resisting torque per single bracket Parent member ø mm (in)
Torque (Nm) Single clamp
Torque (Nm) Double clamps
Torque (Nm) Product: 3541
Torque (Nm) Product: 3544
Torque (Nm) Product: 2414/2415
25 (1)
77
-
-
-
-
42.3 (1.7)
152
-
-
-
-
48.3 (1.9)
178
356
-
-
-
60.3 (2.4)
230
460
115
172
-
76.1 (3)
298
596
159
223
-
88.9 (3.5)
353
706
176
264
-
101.6 (4)
408
816
204
306
816
114.3 (4.5)
462
924
231
346
924
139.7 (5.5)
572
1144
-
-
-
152.4 (6)
627
1254
-
-
-
168.9 (6.6)
698
1396
-
-
-
193 (7.6)
802
1396
-
-
-
244.5 (9.6)
1025
-
-
-
-
Mresisting
Mresisting
F wind
Example using two brackets with double clamps. Parent member is ø 114.3 mm (4.5 in). Maximum torque is then 2 x 924 = 1848 Nm.
Mresisting
F wind
F wind
Example using two brackets with single clamps. Parent member is ø 114.3 mm (4.5 in). Maximum torque is then 2 x 462 = 924 Nm.
Example using three brackets with single clamps. Parent member is ø 114.3 mm (4.5 in). Maximum torque is then 3 x 462 = 1386 Nm.
© 2021 MAFI AB. All rights reserved. © 2019–2020 MAFI AB. All rights reserved.
Bracket Properties
137 Rev 1
Bracket Properties
Bracket properties
Guidance
MAFI brackets are flexible – they can fit different sizes and profiles of parent member, and the offset distance can be varied. This table allows a quick comparison of load capacity, parent member, offset member and offset range. Please read our disclaimer found on page 4.
It’s OK to have the pole a size less than the U-bolt. A U-bolt works by squeezing the pole against the bracket through the tangential point of contact, not by gripping the sides of the pole. It's important to follow the installation instructions regarding the specified nut-tightening torque. The tightening torque is calculated for every MAFI U-bolt leg or threaded rod to produce the required tension. It's not going to slip if it's installed properly. Offset Member Allowed Ø mm (in) ø U-bolt mm (in)
60.3 (2.4) 76.1 (3)
88.9 (3.5)
101.1 (4)
114.3 (4.5)
76.1 (3) 114.3 (4.5)
Load Capacity is the maximum mass (equipment plus offset member) that you can hang on a pair of brackets at the maximum offset. Extra brackets can be added to increase the load capacity proportionately e.g. two pairs of brackets supporting a single offset member can carry double the mass of a single pair. In addition to the permitted equipment mass, brackets mounted at least as a pair can support a 160 kg rigger standing on the end, exceptions are 53XX and 4324X. In addition to the permitted equipment mass, brackets mounted at least as a pair can support a fall arrest load of 6 kN. Exceptions are 3274, 53XX and 4324X. If a fall arrest event would occur, all involved brackets should be replaced. All brackets in the table apart from 532X and 4324X are sold as pairs.
Load Capacity The 3263 bracket pair to the left can carry 120 kg/265 lb. Using two pairs of bracket means that the load capacity doubles to 240 kg/529 lb.
F
Parent Member versus Offset Member The parent member is what the bracket is attached to, while the offset member is where the equipment goes.
2xF Offset member Parent member
© 2021 MAFI AB. All rights reserved.
Min and Max Offset The minimum and maximum c/c distance between parent and offset member.
138
Wall Bracket Properties
Wall Bracket Properties Guidance
This table allows a quick comparison of load capacity, offset member and offset range for MAFI wall brackets. Please read our disclaimer found on page 4. It’s OK to have the pole a size less than the U-bolt. A U-bolt works by squeezing the pole against the bracket through the tangential point of contact, not by gripping the sides of the pole. It's important to follow the installation instructions regarding the specified nut-tightening torque. The tightening torque is calculated for every MAFI U-bolt leg or threaded rod to produce the required tension. It's not going to slip if it's installed properly. Offset Member Allowed Ø mm (in) ø U-bolt mm (in)
60.3 (2.4) 76.1 (3)
88.9 (3.5)
101.1 (4) 114.3 (4.5)
76.1 (3) 114.3 (4.5)
Load Capacity is the maximum mass (equipment plus offset member) that you can hang on a pair of brackets at the maximum offset. Extra brackets can be added to increase the load capacity proportionately e.g. two pairs of brackets supporting a single offset member can carry double the mass of a single pair. In addition to the permitted equipment mass, all brackets mounted at least as a pair can support a 160 kg rigger standing on the end. All brackets in the table are sold as pairs.
Load Capacity The 3541 bracket pair to the left can carry 100 kg/220 lb. Using two pairs of bracket means that the load capacity doubles to 200 kg/441 lb.
F
2xF
Side Force
Offset Member
Min and Max Offset
The side force is the maximum force that a single bracket is designed for.
Showing a pair of 3544 brackets with an offset member mounted.
Offset for 3541, 3544 and 2414 is measured from wall surface to offset member centre. For 43692 it is the offset between the wall corner and offset member centre.
F
© 2021 MAFI AB. All rights reserved.
Wall Bracket Properties
139
Product
Load Capacity
Side Force
3541
100 kg (220 lb)
1200 N per single bracket
3544
100 kg (220 lb)
2414
Configuration 1: 500 kg (1102 lb) Configuration 2: 240 kg (529 lb) 100 kg (220 lb)
43692
Configuration 1
Equipment mounted between brackets.
© 2021 MAFI AB. All rights reserved.
Offset Member
Min Offset
Max Offset
60 - 114.3 mm (2.4 - 4.5 in)
141 mm (5.6 in)
172 mm (6.8 in)
2300 N per single bracket
60 - 114.3 mm (2.4 - 4.5 in)
416 mm (16.4 in)
447 mm (17.6 in)
12000 N per single bracket
101.6 - 114.3 mm 226 mm (4 - 4.5 in) (8.9 in)
226 mm (8.9 in)
12000 N per single bracket
101.6 - 114.3 mm 226 mm (4 - 4.5 in) (8.9 in)
226 mm (8.9 in)
2300 N per single bracket
60 - 114.3 mm (2.4 - 4.5 in)
155 mm (6.1 in)
Configuration 2
Equipment mounted above brackets.
124 mm (4.9 in)
140
MAFI Global Network
MAFI Global Network MAFI Group
Distributors
MAFI AB - Mora
Europe
Asia
Elektroskandia Sweden AB
Rom 733, 7/F No 968 West Beijing Road, Jingan, Shanghai
Seljavägen 15 SE-792 95 Mora info@mafigroup.com
Norrvikenleden 97 SE-191 83 Sollentuna, Sweden www.elektroskandia.se
Stockholm office Isafjordsgatan 19 SE-164 30 Kista MAFI US Inc Ltd - Dallas 2701 E State Highway 121 Suite 630 Lewisville, TX 75056 americas@mafigroup.com MAFI East Africa Limited - Nairobi Sales office: Watermark Business Park Ngede Road Karen Nairobi Kenya eastafrica@mafigroup.com Warehouse: Mavoko Business Park Mlongo Mackakos Kenya
Ahlsell Ahlsell Sweden AB Årstaängsvägen 11 Liljeholmen/Stockholm www.ahlsell.se Regoort Network Infrastructure Griendwerkersstraat 11 3334 KB Zwijndrecht, The Netherlands www.regoort.nl Graphicshow Cable Accessories (GCA) Ltd Ronell Place 41A Shire Hill Industrial Estate Saffron Walden, Essex CB11 3AQ United Kingdom www.gcaltd.co.uk
MAFI Ltd Co - Shanghai Rom 733, 7/F No 968 West Beijing Road, Jingan, Shanghai china@mafigroup.com
Mora Stockholm
Dallas
Shanghai
Nairobi
www.mafigroup.com
Table of Content
141
Table of content Article no.
Product name
1242
Universal Remote Radio Bracket
2230
Adjustable Strut Family
2414
Heavy Duty Wall Mount
2415
Page
Article no.
Product name
38
5320
Crossover Kit
28
88
6030
Dual ERS Bracket
36
76
6070, 6072
RRH Mounting Bracket
50
Remedial Wall Mount
78
7000
Stainless Steel 10-hole Groundbar
126
3022
Adaptor beams
92
8051
Small Adjustable Cabinet Platform
120
3059
GPS Mount
56
8057
Wall Mounted Cabinet Platform
84
3115
Antenna Offset
60
8411
Large Radio Mount
48
3117
Antenna Offset Large
62
32655
Cable Holder Family
124
3263
One-Direction Offset Family
10
43249
Combiclamp Family
30
3268
Symmetric Offset Family
12
43692
Corner Wall Mount
82
3274
Small Universal Pole Mount
22
91110
Extra Pole Kit
118
3510
Rafter Bracket Kit
94
Tubes and Beams
132
3541
Medium Duty Wall Mount
72
Threaded Rods and U-bolts
133
3544
Large Offset Wall Mount
74
Various Accessories
134
3610
Raking Tower Leg Offset Family
14
Rotational Slip Table
136
3611
Vertical Tower Leg Offset Family
16
Bracket Properties
137
3622, 3623
High Torque Tower Leg Offset
18
Wall Bracket Properties
138
4019
RRU Mount Family
40
4036
Singel/Dual RRU Support
42
4060
Back-to-Back Radio Mount
44
4112
Free Stander Light
4120
Roof Butler
98
4260, 4261, 4262 Antenna Cable Holder Family
128
4270, 4271
Radio Cable Holder Family
130
4309
Free Stander Medium
102
4310
Free Stander Platform
104
4316
Single Pole
96
4418
3-Sector Antenna Mount
24
100
4610
Free Standing Corner Mount 2x2
106
4611
Free Standing Corner Mount 3x3
110
4612
Free Standing Corner Mount 4x4
114
5002
Slim Antenna Mount
66
5110
Radio Support
34
5310
Joint Plate Kit
26
Page
142
Notes
MAFI GROUP
Overall e-mail adress: info@mafigroup.com Personnel: firstname.lastname@mafigroup.com www.mafigroup.com