EPrints Technical Mailing List Archive

Message: #07173


< Previous (by date) | Next (by date) > | < Previous (in thread) | Next (in thread) > | Messages - Most Recent First | Threads - Most Recent First

Re: [EP-tech] eprints3 migration with apache port change


Hi Herbert,

You will need to run at the following two commands, substituting
ARCHIVENAME as appropriate and assuming your EPrints path is
/opt/eprints3/:

/opt/eprints3/bin/generate_static ARCHIVENAME
/opt/eprints3/bin/generate_views ARCHIVENAME

The second command may take a while to run depending on how many
publications you have stored.

Regards

David Newman


On Mon, 2018-02-26 at 15:58 +0100, Herbert Hrachovec wrote:
> In migrating an existing eprints3 installation I have to change the
> apache port from previously 8080 to 80. Alas, after successfully
> getting the new site up all the information + record pages are still
> coded for the 8080 port. 
> 
> 
> Could you please advise me how to fix this?
> 
> Thanks in advance,
> 
> h.h. 
> 
> ----
> Hochschullehrer, Philosophie, Wien
> *** Options: http://mailman.ecs.soton.ac.uk/mailman/listinfo/eprints-
> tech
> *** Archive: http://www.eprints.org/tech.php/
> *** EPrints community wiki: http://wiki.eprints.org/
> *** EPrints developers Forum: http://forum.eprints.org/